Evolution Technologies IR Out Control, Evolution 222 responds to 12 V input trigger commands

Page 36

(SECTION SEVEN: Customizing the Evolution 222 continued)

(Input Trigger continued)

OFF

The Evolution 222 does not respond to 12 V input trigger commands.

NORMAL

The Evolution 222 responds to 12 V input trigger commands.

THEATER

The Evolution 222 responds to 12 V input trigger commands, and the theater mode enabled input is selected automatically. See Theater Mode, on page 41.

IR Out Control

5Menu Button or Key Enter or exit the menu.

14 Volume Knob or Level Keys

This function enables you to access Evolution 222 IR commands and program a learning remote control.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or up and down keys (14) on the remote control to select: IR OUT.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: B-1

MAIN.

3.Use the level control knob or the up and down keys to select the desired IR command from the list.

4.Press the enter button or key to send the command out via the preamplifier front panel IR transmitter (2). The stand-by LED (7) on the preamplifier flashes, indicating that the command has been sent.

5.Repeat Steps 2-4 for each of the commands you wish to transmit.

6.Press the enter button or key to confirm the selection. The front panel display reads: IR OUT.

For a listing of IR codes, see the Evolution 222 developer’s reference entitled

RS-232 Port: Sending Commands and Interpreting Data.

Navigate the menu hierarchy; review functions and configu- ration options.

6Enter Button or Key

Select a configuration option; confirm a selection.

BACK

Scroll backwards through the menu hierarchy; exit a menu option without confirming it.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Evolution 222 Features and Technology FeaturesVoltage Signal Transmission Traditional Audio System How Cast and Krell Current Mode InteractRevolutionary Krell Cast Technology Cast BasicsCast Cable Construction Evolution CastBest Musical Performance Definition of Terms Inputs and OutputsOperation Krell Current Mode TechnologyPage Placement AC Power GuidelinesConnecting the Evolution 222 to Your System Quick StartOperating the Evolution Anatomy of the Evolution SelectorsPower Front Panel DescriptionChassis Remote Functions on the Front PanelDisplay Navigate/CustomizePreamplifier Functions Level Control Level Control Knob or Level KeysEvolution 222 Remote Control Remote Control Description Battery Installation and RemovalAmplifier Functions Balance FunctionsCompact Disc and DVD Functions Evolution 222 Back Panel Configurations Back Panel DescriptionInputs OutputsRemote Connections on the Back Panel 22 RS-23223 RC-5 24 12 VDC In/Out 12 V TriggerPhono Stage Connector Phono Power PortIEC Power Cord Receptacle Connecting the Evolution 222 to Your System XLR Pin ConfigurationInput and Output Connections Connection Steps Evolution 222 Operation On/Off and Stand-by OperationTo Turn Off The System Volume Knob or Level Keys Customizing the EvolutionNavigation Conventions Menu Functions AC MainsBalance channel Balance input trimDisplay Menu Button or Key Enter or exit the menuInfo Input Level Trim Input NameInput Phase Input TriggerEvolution 222 responds to 12 V input trigger commands IR Out ControlLink Control can Link MuteOutput Trigger RC-5 Control RecallRS-232 Control SaveTheater Mode Volume Display Troubleshooting System Noise Warranty Page Return Authorization Procedure To contact the Krell Service DepartmentSpecifications InputsConnair Road
Top Page Image Contents