Evolution Technologies 222 manual Menu Functions, AC Mains

Page 30

OFF, ON.

(SECTION SEVEN: Customizing the Evolution 222 continued)

Menu Functions

AC Mains

This function enables you to operate the Evolution 222 from a switched AC outlet. If AC Mains is set to ON, the preamplifier turns on immediately, by-passing stand- by. Thereafter, you may switch the preamplifier to and from stand-by, using the power button or pwr key (1). The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or up and down keys (14) on the remote control to select: AC MAINS.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: OFF.

3.Use the level control knob or the up and down keys to select the desired option: OFF or ON.

4.Press the enter button or key to confirm the selection. The front panel display

reads: AC MAINS.

OFF

The Evolution 222 switches to stand-by mode, when it detects AC power.

ON

The Evolution 222 turns on immediately, bypassing the stand-by mode, when it detects AC power.

Image 30

Contents Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Evolution 222 Features and Technology FeaturesRevolutionary Krell Cast Technology Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Cast BasicsCast Cable Construction Evolution CastBest Musical Performance Definition of Terms Inputs and OutputsOperation Krell Current Mode TechnologyPage Placement AC Power GuidelinesConnecting the Evolution 222 to Your System Quick StartOperating the Evolution Anatomy of the Evolution SelectorsChassis PowerFront Panel Description Remote Functions on the Front PanelDisplay Navigate/CustomizePreamplifier Functions Level Control Level Control Knob or Level KeysEvolution 222 Remote Control Amplifier Functions Remote Control DescriptionBattery Installation and Removal Balance FunctionsCompact Disc and DVD Functions Evolution 222 Back Panel Inputs ConfigurationsBack Panel Description Outputs23 RC-5 Remote Connections on the Back Panel22 RS-232 24 12 VDC In/Out 12 V TriggerPhono Stage Connector Phono Power PortIEC Power Cord Receptacle Connecting the Evolution 222 to Your System XLR Pin ConfigurationInput and Output Connections Connection Steps Evolution 222 Operation On/Off and Stand-by OperationTo Turn Off The System Volume Knob or Level Keys Customizing the EvolutionNavigation Conventions Menu Functions AC MainsBalance channel Balance input trimDisplay Menu Button or Key Enter or exit the menuInfo Input Level Trim Input NameInput Phase Input TriggerEvolution 222 responds to 12 V input trigger commands IR Out ControlLink Control can Link MuteOutput Trigger RC-5 Control RecallRS-232 Control SaveTheater Mode Volume Display Troubleshooting System Noise Warranty Page Return Authorization Procedure To contact the Krell Service DepartmentSpecifications InputsConnair Road