Evolution Technologies 222 manual Theater Mode

Page 41

Theater Mode

This function enables you to select theater mode volume for a particular input. Use this function when connecting the output of a preamp/processor to the Evolution 222 for home theater applications. Configuring an input for theater mode sets that input for unity gain, and suspends the level control of the Evolution 222. Volume adjustments are then made through the preamp/processor connected to the input configured for theater mode on the Evolution 222. The options are: ON,

OFF.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys (14) on the remote control to select THEATER.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default input: B-1.

3.Use the level control knob or the up and down keys to select the desired input:

B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.

4.Press the enter button or key. The front panel display shows the default mode:

OFF.

5.Use the level control knob or the up or down keys to select ON or OFF.

6.Press the enter button or key to confirm the selection and return to the select- ed input.

ON

The selected input is set to THEATER and the volume control for the theater input is disengaged on the Evolution 222.

OFF

The selected input is configured normally and the volume control for the normal input is engaged on the Evolution 222.

Note

Only one input on the Evolution 222 can be in theater mode at a time. When theater mode is set for an input, theater mode is cleared automatically from other inputs.

The Evolution 222 selects the theater input automatically upon power on, if the input trigger is configured for THEATER. See Input Trigger, on pages 35-36.

continued

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Features Evolution 222 Features and TechnologyHow Cast and Krell Current Mode Interact Voltage Signal Transmission Traditional Audio SystemRevolutionary Krell Cast Technology Cast BasicsBest Musical Performance Cast Cable ConstructionEvolution Cast Operation Definition of TermsInputs and Outputs Technology Krell Current ModePage AC Power Guidelines PlacementQuick Start Connecting the Evolution 222 to Your SystemOperating the Evolution Selectors Anatomy of the EvolutionFront Panel Description PowerChassis Remote Functions on the Front PanelPreamplifier Functions DisplayNavigate/Customize Level Control Knob or Level Keys Level ControlEvolution 222 Remote Control Battery Installation and Removal Remote Control DescriptionAmplifier Functions Balance FunctionsCompact Disc and DVD Functions Evolution 222 Back Panel Back Panel Description ConfigurationsInputs Outputs22 RS-232 Remote Connections on the Back Panel23 RC-5 24 12 VDC In/Out 12 V TriggerIEC Power Cord Receptacle Phono Stage ConnectorPhono Power Port Input and Output Connections Connecting the Evolution 222 to Your SystemXLR Pin Configuration Connection Steps To Turn Off The System Evolution 222 OperationOn/Off and Stand-by Operation Navigation Conventions Volume Knob or Level KeysCustomizing the Evolution AC Mains Menu FunctionsBalance input trim Balance channelMenu Button or Key Enter or exit the menu DisplayInfo Input Name Input Level TrimInput Trigger Input PhaseIR Out Control Evolution 222 responds to 12 V input trigger commandsMute Link Control can LinkOutput Trigger Recall RC-5 ControlSave RS-232 ControlTheater Mode Volume Display Troubleshooting System Noise Warranty Page To contact the Krell Service Department Return Authorization ProcedureInputs SpecificationsConnair Road
Top Page Image Contents