Evolution Technologies 222 manual Input Phase, Input Trigger

Page 35
NORMAL, INVERT.

Input Phase

This function enables you to invert the absolute polarity of the selected input 180 degrees. The selections are:

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys (14) on the remote control to select: INPUT PHASE.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: B-1.

3.Use the level control knob or the up and down keys to select the desired input

from the list: B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.

4.Press the enter button or key. The front panel display shows the default mode:

NORMAL.

5.Use the level control knob or the up and down keys to select: NORMAL or INVERT.

6.Press the enter button or key to confirm the selection. The front panel display shows the selected input.

NORMAL

The phase of the selected input is unaffected.

INVERT

The phase of the selected input is inverted 180 degrees.

Input Trigger

This function enables you to configure the input trigger. The options are: OFF,

NORMAL, THEATER.

5Menu Button or Key Enter or exit the menu.

14 Volume Knob or Level Keys

Navigate the menu hierarchy; review functions and configu- ration options.

6Enter Button or Key

Select a configuration option; confirm a selection.

BACK

Scroll backwards through the menu hierarchy; exit a menu option without confirming it.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys on the remote control to select: INPUT TRIGGER.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: NORMAL.

3.Use the level control knob or the up and down keys to select the desired

option: OFF, NORMAL, or THEATER.

4.Press the enter button or key to confirm the selection. The front panel display

reads: INPUT TRIGGER.

continued

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Features Evolution 222 Features and TechnologyCast Basics Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Revolutionary Krell Cast TechnologyBest Musical Performance Cast Cable ConstructionEvolution Cast Operation Definition of TermsInputs and Outputs Technology Krell Current ModePage AC Power Guidelines PlacementQuick Start Connecting the Evolution 222 to Your SystemOperating the Evolution Selectors Anatomy of the EvolutionRemote Functions on the Front Panel PowerFront Panel Description ChassisPreamplifier Functions DisplayNavigate/Customize Level Control Knob or Level Keys Level ControlEvolution 222 Remote Control Balance Functions Remote Control DescriptionBattery Installation and Removal Amplifier FunctionsCompact Disc and DVD Functions Evolution 222 Back Panel Outputs ConfigurationsBack Panel Description Inputs24 12 VDC In/Out 12 V Trigger Remote Connections on the Back Panel22 RS-232 23 RC-5IEC Power Cord Receptacle Phono Stage ConnectorPhono Power Port Input and Output Connections Connecting the Evolution 222 to Your SystemXLR Pin Configuration Connection Steps To Turn Off The System Evolution 222 OperationOn/Off and Stand-by Operation Navigation Conventions Volume Knob or Level KeysCustomizing the Evolution AC Mains Menu FunctionsBalance input trim Balance channelMenu Button or Key Enter or exit the menu DisplayInfo Input Name Input Level TrimInput Trigger Input PhaseIR Out Control Evolution 222 responds to 12 V input trigger commandsMute Link Control can LinkOutput Trigger Recall RC-5 ControlSave RS-232 ControlTheater Mode Volume Display Troubleshooting System Noise Warranty Page To contact the Krell Service Department Return Authorization ProcedureInputs SpecificationsConnair Road
Top Page Image Contents