Evolution Technologies 222 manual Link Control can Link, Mute

Page 37
LINKED, UNLINKED.

Link Control (CAN Link)

This function enables you to link and unlink CAN Link-enabled Krell products. The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys (14) on the remote control to select: LINK CONTROL.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: LINKED.

3.Use the level control knob or the up and down keys to select the desired

option: LINKED, or UNLINKED.

4.Press the enter button or key to confirm the selection. The front panel reads:

LINKED.

LINKED

When preamplifier channels are linked, power, volume, balance, phase, tape, mute, and input selections are automatically communicated between linked pre- amplifier channels. All other settings remain local.

UNLINKED

When a preamplifier channel is unlinked, it does not respond to commands from any other linked preamplifier channels. After the preamplifier channel is unlinked, settings can be changed, independent of other preamplifier channels.

Mute

This function enables you to control the mute mode. Options are: FULL, -20 dB, BACK.

Enter the menu, then:

1.Use the level control knob, or the up and down keys (14) to select: MUTE.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: FULL.

3.Use the level control knob, or the up and down keys to select the desired

option: FULL or -20 dB.

4.Press the enter button or key to confirm the selection. The front panel display reads: MUTE.

FULL

The output of the Evolution 222 is completely silenced.

-20dB

The output of the Evolution 222 is reduced by 20 dB and may still be audible.

continued

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Features Evolution 222 Features and TechnologyHow Cast and Krell Current Mode Interact Voltage Signal Transmission Traditional Audio SystemRevolutionary Krell Cast Technology Cast BasicsEvolution Cast Cast Cable ConstructionBest Musical Performance Inputs and Outputs Definition of TermsOperation Technology Krell Current ModePage AC Power Guidelines PlacementQuick Start Connecting the Evolution 222 to Your SystemOperating the Evolution Selectors Anatomy of the EvolutionFront Panel Description PowerChassis Remote Functions on the Front PanelNavigate/Customize DisplayPreamplifier Functions Level Control Knob or Level Keys Level ControlEvolution 222 Remote Control Battery Installation and Removal Remote Control DescriptionAmplifier Functions Balance FunctionsCompact Disc and DVD Functions Evolution 222 Back Panel Back Panel Description ConfigurationsInputs Outputs22 RS-232 Remote Connections on the Back Panel23 RC-5 24 12 VDC In/Out 12 V TriggerPhono Power Port Phono Stage ConnectorIEC Power Cord Receptacle XLR Pin Configuration Connecting the Evolution 222 to Your SystemInput and Output Connections Connection Steps On/Off and Stand-by Operation Evolution 222 OperationTo Turn Off The System Customizing the Evolution Volume Knob or Level KeysNavigation Conventions AC Mains Menu FunctionsBalance input trim Balance channelMenu Button or Key Enter or exit the menu DisplayInfo Input Name Input Level TrimInput Trigger Input PhaseIR Out Control Evolution 222 responds to 12 V input trigger commandsMute Link Control can LinkOutput Trigger Recall RC-5 ControlSave RS-232 ControlTheater Mode Volume Display Troubleshooting System Noise Warranty Page To contact the Krell Service Department Return Authorization ProcedureInputs SpecificationsConnair Road
Top Page Image Contents