Evolution Technologies 222 manual Display, Menu Button or Key Enter or exit the menu

Page 32

(SECTION SEVEN: Customizing the Evolution 222 continued)

Display

5Menu Button or Key Enter or exit the menu.

14 Volume Knob or Level Keys

Navigate the menu hierarchy; review functions and configu- ration options.

6Enter Button or Key

Select a configuration option; confirm a selection.

BACK

This function enables you to turn on the front panel display (3) all the time, or turn it off after a time out. The options are: ON, TIMED.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys on the remote control (14) to select: DISPLAY.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) reads: MODE.

3.Press the enter button or key (6) again. The front panel display shows the default mode: ON.

4.Use the level control knob or the up and down keys to select the desired option: ON or TIMED.

5.Press the enter button or key to confirm the selection. The front panel display reads: MODE.

6.Use the level control knob or the up and down keys to select: BRIGHTNESS.

7.Press the enter button or key. The front panel display shows the default mode:

HIGH.

8.Use the level control knob or the up and down keys to select the desired

brightness: OFF, LOW (25%), MED (50%), or HIGH (100%).

9.Press the enter button or key to confirm the selection. The front panel display

reads: BRIGHTNESS.

ON

The front panel display is always on.

TIMED

The front panel display times out after 5 seconds.

BRIGHTNESS

Controls the brightness of the display. When the brightness setting is OFF, the display is at 50% of brightness when in menu mode, and turns completely off when you leave the menu mode.

Scroll backwards through the menu hierarchy; exit a menu option without confirming it.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Evolution 222 Features and Technology FeaturesVoltage Signal Transmission Traditional Audio System How Cast and Krell Current Mode InteractRevolutionary Krell Cast Technology Cast BasicsBest Musical Performance Cast Cable ConstructionEvolution Cast Operation Definition of TermsInputs and Outputs Krell Current Mode TechnologyPage Placement AC Power GuidelinesConnecting the Evolution 222 to Your System Quick StartOperating the Evolution Anatomy of the Evolution SelectorsPower Front Panel DescriptionChassis Remote Functions on the Front PanelPreamplifier Functions DisplayNavigate/Customize Level Control Level Control Knob or Level KeysEvolution 222 Remote Control Remote Control Description Battery Installation and RemovalAmplifier Functions Balance FunctionsCompact Disc and DVD Functions Evolution 222 Back Panel Configurations Back Panel DescriptionInputs OutputsRemote Connections on the Back Panel 22 RS-23223 RC-5 24 12 VDC In/Out 12 V TriggerIEC Power Cord Receptacle Phono Stage ConnectorPhono Power Port Input and Output Connections Connecting the Evolution 222 to Your SystemXLR Pin Configuration Connection Steps To Turn Off The System Evolution 222 OperationOn/Off and Stand-by Operation Navigation Conventions Volume Knob or Level KeysCustomizing the Evolution Menu Functions AC MainsBalance channel Balance input trimDisplay Menu Button or Key Enter or exit the menuInfo Input Level Trim Input NameInput Phase Input TriggerEvolution 222 responds to 12 V input trigger commands IR Out ControlLink Control can Link MuteOutput Trigger RC-5 Control RecallRS-232 Control SaveTheater Mode Volume Display Troubleshooting System Noise Warranty Page Return Authorization Procedure To contact the Krell Service DepartmentSpecifications InputsConnair Road
Top Page Image Contents