Tecra 750 Series Disassembly Overview, (cont.)
CAUTION: When you remove the FL, be careful not to let any dust or other foreign matter contaminate the LCD panel. Any contamination can affect the performance of the unit.
To remove the FL, follow the steps below. 1. Turn off the power to the computer.
Disconnect the AC adapter and all external cables connected to the computer.
2. Remove the battery pack, display mask, FL inverter board, LCD module, and microphone.
3. Remove one strip of tape securing the FL cable to the LCD frame and lift the FL cable.
ê 4. Remove two M2x4
5. Carefully peel up the insulator adhered to the circuit boards and ICs.
6. Disconnect the flexible cable from the larger board and press down the connector flap to avoid damage.
7. Lift up the center of the metal FL cover until two latches are released.
8. Insert a thin object such as the end of tweezers under the metal FL cover until the cover is freed.
9. Lift up on the metal projections and pull the FL cover slightly forward, slide it left, and lift it out.
10. Carefully lift up the white sheet covering the FL.
11. Lift out the pink FL cable connector.
12. Lift the white FL cable out of its groove
î
to remove the FL with cables.
í
î
Images continued on the next page
Toshiba TRR | Page 27 | 4/00, Tecra |