Toshiba manual Tecra 750 Series Disassembly Overview

Tecra 750 Series Disassembly Overview, (cont.)

ê

î

í

To disassemble the HDD Pack, follow the steps below.

1.After removing the HDD pack, lift the left end of the cover up.

2.Slide the cover all the way to the right.

3.Lift the cover up and remove it.

4.Remove four M2.5x6 silver screws from HDD pack.

5.Remove the HDD tray and connector cover.

6.Remove four M3x4 flat-head screws.

7.Remove the flexible cable.

CAUTION: Do not try to disconnect by pulling on the flexible cable.

CAUTION: Do not apply pressure to the top or bottom of the HDD.

Toshiba TRR Page 16 4/00, Tecra