Advantech UNO-1170E user manual Safety Precautions, Relative humidity 95% @ 40C

•Vibration Protection: IEC 68 2-64 (Random 1 Oct./min, 1hr/axis),

CompactFlash: 2Grms@ 5~500Hz, (Optional, UNO-1170E only)

HDD: 0.5 Grms @ 5~500Hz

•Power Supply Voltage: 10-36 VDC, reversed wiring protection

•Power Requirement: Min. 48 W (10 ~ 53 VDC) (e.g +24 V @ 2 A) (ATX)

•Power Consumption: 24W (Typical)

•Operating Temperature: -20~60° C (-4~149° F)

•Storage Temperature: -20~80° C (-4~176° F)

•Relative humidity: 95% @ 40°C

•Weight: 1.6KG (for UNO-1170) 2.0KG (for UNO-1170E)

•Chassis size (W × L × H): 85x155x140 mm (3.4"x 6.1"x 5.6") (UNO-1170) 110 x 155 x 140 mm (4.4" x 6.1" x 5.6") (UNO-1170E)

•Software options: WinXP Embedded, Win CE, Linux

•Certification: CE, FCC Class A, UL

1.3Safety Precautions

The following sections tell how to make each connection. In most cases, you will simply need to connect a standard cable. All of the connector pin assign- ments are shown in Appendix A.

Warning!! Always disconnect the power cord from your chassis when you are working on it. Do not connect while the power is on. A sudden rush of power can damage sensitive elec- tronic components. Only experienced electronics person- nel should open the chassis.

Caution!! Always ground yourself to remove any static electric charge before touching UNO-1170. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic com- ponents on a static-dissipative surface or in a static- shielded bag.

3