Advantech UNO-1170E user manual Chassis Grounding, Power Connection

Page 31

3.Manually adjust the bracket to perfectly fit the USB keypro/dongle.

(Note: Due to the extremely compact space in the chassis, the length for USB keypro has to be limited to 45mm)

3.3 Chassis Grounding

Please connect the chassis ground of UNO-1170 with "EARTH".

Figure 3.1: Chassis Grounding Connection

3.4 Power Connection

Connect the UNO-1170 to a 10 ~ 30 VDC power source. The power source can either be from a power adapter or an in-house power source.

23

Image 31 Contents
UNO-1170/1170E Copyright Notice Acknowledgements Product Warranty 2 years Technical Support and Assistance FCC Class aPacking List Safety Instructions Safety Precaution Static Electricity Contents Appendix Programming the Watchdog Timer UNO-1170 Overview Introduction Hardware SpecificationsRelative humidity 95% @ 40C Safety PrecautionsUNO-1170 Series Chassis DimensionsUNO-1170E Chassis Dimensions Page Hardware Functionality UNO-1170 Front View UNO-1170 PeripheralsUNO-1170E Front View COM3 RS-232/422/485 Interfaces COM1~COM2 RS-232 Interfaces4 RS-232/422/485 Selection Jumper Setting for RS-422/485 Interface Default SettingTerminal Resistor Setup for RS-422/485 Power Connector LAN Ethernet ConnectorVGA VGA Display Connector LED IndicatorsPS/2 Keyboard and Mouse Connector Universal Serial Bus ConnectorsLED and Buzzer for System Diagnosis Reset Reset ButtonBattery Backup Sram AudioProgrammable LED Control Bit RS-422/485 Jumper Settings 14 PCI/104+ Connectors UNO-1170E onlyPage Initial Setup CompactFlash Card Installation Page USB Keypro and Keypro Bracket Installation Chassis Grounding Power ConnectionPC/104+ Card Installation UNO-1170E Page Page Hard Drive installation UNO-1170E Page DIN-rail Mounting Setup Bios Setup and System AssignmentsWallmounting Setup System Settings and Pin Assignments System I/O Address & Interrupt Assignments Appendix a System Settings and Pin AssignmentsTable A.2 UNO-1170 Interrupt Assignment Figure A.1 Connector & Jumper Locations Top Board Connectors and JumpersTable A.3 Connectors & Jumpers Table A.4 Connectors & Jumpers UNO-1170E RS-232 Serial Port COM1~COM2 RS-232/422/485 Serial Port COM3 Ethernet RJ-45 Connector LAN1~LAN2PS/2 Keyboard and Mouse Connector CN10 Power Screw Terminal CN8VGA Display Connector CN15 USB Connector CN13Display Memory Sata Data Connector CN17 Page Programming the Watchdog Timer Appendix B Programming the Watchdog Timer
Related manuals
Manual 52 pages 63.36 Kb