Advantech UNO-1170E user manual UNO-1170 Series, Chassis Dimensions

Page 12

1.4 UNO-1170 Series

There are four products in UNO-1170 series, as listed below:

UNO-1170-C11E

UNO-1170 with Intel Celeron M 1.0GHz CPU

 

and 512MB RAM

 

 

UNO-1170-P12E

UNO-1170 with Intel Pentium M 1.4GHz CPU

 

and 1GB RAM

UNO-1170E-C11E

UNO-1170 with Intel Celeron M 1.0GHz CPU,

 

512MB RAM, and PC/104+ expansion

UNO-1170E-P12E

UNO-1170 with Intel Pentium M 1.4GHz CPU,

 

1GB RAM and PC/104+ expansion

1.5 Chassis Dimensions

Figure 1.1: UNO-1170 Chassis Dimensions

UNO-1170 User Manual

4

Image 12 Contents
UNO-1170/1170E Copyright Notice Acknowledgements Product Warranty 2 years FCC Class a Technical Support and AssistancePacking List Safety Instructions Safety Precaution Static Electricity Contents Appendix Programming the Watchdog Timer UNO-1170 Overview Hardware Specifications IntroductionSafety Precautions Relative humidity 95% @ 40CChassis Dimensions UNO-1170 SeriesUNO-1170E Chassis Dimensions Page Hardware Functionality UNO-1170 Peripherals UNO-1170 Front ViewUNO-1170E Front View COM1~COM2 RS-232 Interfaces COM3 RS-232/422/485 InterfacesJumper Setting for RS-422/485 Interface Default Setting 4 RS-232/422/485 SelectionTerminal Resistor Setup for RS-422/485 LAN Ethernet Connector Power ConnectorLED Indicators PS/2 Keyboard and Mouse ConnectorUniversal Serial Bus Connectors VGA VGA Display ConnectorReset Reset Button Battery Backup SramAudio LED and Buzzer for System DiagnosisProgrammable LED Control Bit 14 PCI/104+ Connectors UNO-1170E only RS-422/485 Jumper SettingsPage Initial Setup CompactFlash Card Installation Page USB Keypro and Keypro Bracket Installation Power Connection Chassis GroundingPC/104+ Card Installation UNO-1170E Page Page Hard Drive installation UNO-1170E Page Bios Setup and System Assignments DIN-rail Mounting SetupWallmounting Setup System Settings and Pin Assignments Appendix a System Settings and Pin Assignments System I/O Address & Interrupt AssignmentsTable A.2 UNO-1170 Interrupt Assignment Board Connectors and Jumpers Figure A.1 Connector & Jumper Locations TopTable A.3 Connectors & Jumpers Table A.4 Connectors & Jumpers UNO-1170E RS-232 Serial Port COM1~COM2 Ethernet RJ-45 Connector LAN1~LAN2 RS-232/422/485 Serial Port COM3Power Screw Terminal CN8 PS/2 Keyboard and Mouse Connector CN10USB Connector CN13 VGA Display Connector CN15Display Memory Sata Data Connector CN17 Page Programming the Watchdog Timer Appendix B Programming the Watchdog Timer
Related manuals
Manual 52 pages 63.36 Kb