3.7 BIOS Setup and System Assignments
UNO-1170 uses the Advantech SOM-4481 and SOM-4486 CPU module. For UNO-1170 BIOS setup and system assignments, you can refer to SOM-4481 and SOM-4486 Chapter 4 “Award BIOS Setup” and Appen- dix A “System Assignments”. The SOM-4481 & SOM-4486's user’s manual is in the “Manual” folder on the CD-ROM.
Please note that you can try to “LOAD BIOS DEFAULTS” from the BIOS Setup manual if UNO-1170 does not work properly.
3.8 DIN-rail Mounting Setup
Please follow the below steps to mount the UNO-1170 on the DIN-Rail.
1.Screw the provided DIN-Rail Kit on the rear side of UNO-1170 as the diagram shown below.
2.Hang the UNO-1170 to the DIN-Rail with angle of inclination about 30 degree.
3.Let UNO-1170 down straight to slide over the Rail smoothly.
Note: To get the UNO-1170 down from the Rail, push the device top to down then pull the bottom of the device to let it off the Rail smoothly.
