24 | Replacing the Display |
Assembly |
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Place the display assembly in position and replace the screws, on the display hinges, that secure the display assembly to the computer base.
2Route the display cable and
3Connect the display cable,
4Slide the
5Close the display and turn the computer over.
6Route the
7Connect the
8Turn the computer over.
Postrequisites
1Replace the macro keyboard. See “Replacing the Macro Keyboard” on page 38.
2Replace the keyboard. See “Replacing the Keyboard” on page 35.
3Replace the center control cover. See "Replacing the Center Control Cover" on page 29.
4Replace the base cover. See "Replacing the Base Cover" on page 15.
5Replace the battery pack. See "Replacing the Battery Pack" on page 13.
6Follow the instructions in "After Working Inside Your Computer" on page 11.
48 | Replacing the Display Assembly |