46 | Replacing the Processor |
Module |
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
NOTE: If a new processor module is installed, you will receive a new processor heat- sink assembly, which will include an affixed thermal pad, or you will receive a new thermal pad along with documentation to illustrate proper installation.
Procedure
1Align the
NOTE: The
When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated properly.
CAUTION: To avoid damage to the processor module, hold the screwdriver perpendicular to the processor module when turning the cam screw.
2Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
Postrequisites
1Replace the processor
2Follow the instructions from step 2 to step 5 in Replacing the Palm Rest.
3Replace the dispaly assembly. See “Replacing the Display Assembly” on page 48.
4Replace the macro keyboard. See “Replacing the Macro Keyboard” on page 38.
5Replace the keyboard. See “Replacing the Keyboard” on page 35.
6Replace the center control cover. See "Replacing the Center Control Cover" on page 29.
7Replace the base cover. See "Replacing the Base Cover" on page 15.
8Replace the battery pack. See "Replacing the Battery Pack" on page 13.
9Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Processor Module | 83 |