Main Menu (Continued)
Discrete Graphics | Displays the discrete graphics. |
|
Total Memory | Displays the total memory available in your |
|
| computer. |
|
Memory Bank 0 | Displays the memory size installed in DIMM A. |
|
Memory Bank 1 | Displays the memory size installed in DIMM B. |
|
Memory Bank 2 | Displays the memory size installed in DIMM C. |
|
Memory Bank 3 | Displays the memory size installed in DIMM D. |
|
|
|
|
Advanced Menu |
|
|
|
|
|
Intel SpeedStep | Allows you to enable or disable the Intel |
|
| SpeedStep technology. Disabling this feature |
|
| may improve performance, but will greatly reduce |
|
| battery life. |
|
Virtualization | Allows you to enable or disable the Intel |
|
| Virtualization technology. |
|
USB Emulation | Allows you to enable or disable the USB |
|
| emulation feature. This feature defines how the |
|
| BIOS, in the absence of a |
|
| system, handles USB devices. USB emulation is |
|
| always enabled during POST. |
|
| NOTE: You cannot boot any type of USB device |
|
| (floppy, hard drive, or memory key) when this |
|
| option is disabled. |
|
USB Wake Support | Allows you to enable USB devices to wake the |
|
| computer from standby or to disable the USB |
|
| wake support feature. |
|
| NOTE: If USB Powershare is enabled, a device |
|
| connected to the USB Powershare connector may |
|
| not wake the computer. |
|
USB Power Share | Allows you to charge USB devices when the |
|
| computer is turned off or in standby mode. |
|
| • AC Only: Charge USB devices when |
|
| connected to the AC adapter only. |
|
| • AC and Battery: Charge USB devices when |
|
| connected to AC adapter and when the |
|
| computer is running on battery. |
|
| • Disabled: Disables USB Powershare. |
|
System Setup 99