34 Replacing the Optical Drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Connect the interposer to the optical drive.
2Align the screw holes on the
3Align the slot on the
4Replace the screws that secure the
5Adhere the
Postrequisites
1Replace the I/O board. See “Replacing the I/O Board” on page 62.
2Follow the instructions from step 2 to step 5 in Replacing the Palm Rest.
3Replace the dispaly assembly. See “Replacing the Display Assembly” on page 48.
4Replace the macro keyboard. See “Replacing the Macro Keyboard” on page 38.
5Replace the keyboard. See “Replacing the Keyboard” on page 35.
6Replace the center control cover. See "Replacing the Center Control Cover" on page 29.
7Replace the base cover. See "Replacing the Base Cover" on page 15.
8Replace the battery pack. See "Replacing the Battery Pack" on page 13.
9Follow the instructions in "After Working Inside Your Computer" on page 11.
66 | Replacing the Optical Drive |