Alienware M18X R2 owner manual Removing the Palm Rest

4Turn the computer over.

5Remove the screws that secure the palm-rest assembly to the computer base.

6Carefully pry out the palm-rest assembly from the two tabs along the rear edge of the computer, and then ease the palm-rest assembly from the computer base.

CAUTION: Carefully separate the palmrest from the computer base to avoid damage to the palmrest.

7Lift the palm-rest assembly off the computer base.

8Remove the status-light board. See "Removing the Status-Light Board" on page 54.

1 2

1 screws (3) 2 palm-rest assembly

52 Removing the Palm Rest