Acnodes PC 6170 manual First/Second/Third Boot Device, Boot Other Device, Swap Floppy Drive

Page 50

PC 6170 User’s Manual

First/Second/Third Boot Device

These items allow the selection of the 1st, 2nd, and 3rd devices that the system will search for during its boot-up sequence. The wide range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and CDROM.

Boot Other Device

This item allows the user to enable/disable the boot device not listed on the First/Second/Third boot devices option above. The default setting is Enabled.

Swap Floppy Drive

This allows you to determine whether to enable Swap Floppy Drive or not. When enabled, the BIOS swap floppy drive assignments so that Drive A becomes Drive B, and Drive B become Drive A. By default, this field is set to Disabled.

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive type, 40 or 80 tracks, installed in the system. 360Kb type is 40 tracks while 720Kb, 1.2MB and 1.44MB are all 80 tracks. The default value is Enabled.

Enabled

BIOS searches for floppy disk drive to determine if it is

40 or 80 tracks. Note that BIOS can not tell from

 

720K, 1.2M or 1.44M drives type as they are all 80

 

tracks.

Disabled

BIOS will not search for the type of floppy disk dri ve

by track number. There will be no warning message

 

displayed if the drive installed is 360K.

Boot Up NumLock Status

This option enables and disables the number lock function of the keypad. The default value is On.

On

Keypad functions confine with numbers

 

Off

Keypad functions convert to special functions (i.e.,

 

 

left/right arrow keys)

 

 

 

Gate A20 Option

The default value is Fast.

Normal

The A20 signal is controlled by keyboard controller or

 

 

 

chipset hardware.

 

 

 

 

Fast

Default: Fast. The A20 signal is controlled by Port

 

 

 

92 or chipset specific method.

 

 

 

 

42

SBC83810 BIOS Setup

Image 50
Contents Pentium-M Panel PC Disclaimers Safety Approvals FCC ComplianceSafety Precautions Trademarks Acknowledgments This page does not contain any information Table of Contents Embedded O.S. Installation General Description Front Access USB Ports & OSDIntroduction Most Reliable and Stable Design-Intel Pentium M ProcessorMain CPU board SpecificationsEasy-to-Maintenance Design Back Door System „ Standard I/OSystem Specification „ 17 TFT LCD „ Disk drive housingDimensions Front View and I/O Outlets Front View2 I/O Outlet VGAPackage list Hardware Installation CPU and Dram InstallationDram CPU HDD Installation User’s Manual CD-ROM Installation Put the CD-ROM in the drive bracket and fix it by 6 screws Add-on Card Installation VGA 3 x Serial PortsParallel Port RJ-45 Connector Pin Assignment EthernetMountings Panel/Wall/Desktop/VESA/Rack VESA-ARMWall Mount PC 6170 User’s Manual Desktop Kit Assembly Fix two holders by 2 screws Complete Panel-mount Kit Assembly Rack mounting Assembly Driver Installation SystemSpecification Touch ScreenDriver Installation- Windows 98/2000/XP/CE.NET/XP-Embedded PC 6170 User’s Manual Driver Installation- DOS Identify the communication port and IRQ numberDo Calibration Driver Installation- Linux Install PenMount driverSet COM3 as touch Dual LAN This page does not contain any information Penmount Touch Screen Embedded O.S. InstallationWindows XP Embedded Windows CE.NET Calibration Touch ScreenSBC83810 Bios Setup Standard Cmos Setup MenuDate TimeDrive a type/Drive B type Halt OnAdvanced Bios Features ScsiVirus Warning Hard Disk Boot PriorityQuick Power On Self Test CPU L1 & L2 CacheBoot Up Floppy Seek First/Second/Third Boot DeviceBoot Other Device Boot Up NumLock StatusTypematic Rate Chars/Sec Typematic Rate SettingTypematic Delay Msec Report No FDD For Win Security OptionOS Select for Dram 64MB Sdram CAS latency Time Advanced Chipset FeaturesDram Data Integrity Mode Delayed Transaction System Bios CacheableVideo Bios Cacheable Video RAM CacheableIntegrated Peripherals SPP IDE Primary/Secondary Master/Slave PIO IDE HDD Block ModePower on Function IDE Primary/Secondary Master/Slave UdmaOnboard FDC Controller UART2 Duplex ModeParallel Port Mode Onboard Serial Port 1/PortECP Mode Use DMA Power Management Setup S1POSPM Control by APM Power ManagementAcpi Function Video Off MethodSuspend Mode Doze ModeStandby Mode Video Off AfterThrottle Duty Cycle HDD Power DownPower On by Ring VGA Active MonitorReload Global Timer Events Reset Configuration Data PnP/PCI Configuration SetupPNP OS Installed DMA Resources Resources Controlled ByIRQ Resources Memory ResourcesCurrent FAN1/FAN2 Speed Current CPU TemperaturePC Health Status Speed Spectrum Frequency/Voltage ControlAuto Detect DIMM/PCI Clk Load Fail-Safe Defaults Cmos Setup Utility-Copyright Award SoftwareLoad Optimized Defaults Load Optimized Defaults Y/N? NPower Supply Specification Power Supply FSP180-50PLA1 180W, AC 110~230V InputHOLD-UP Time @FULL Load Short Circuit Protection Efficiency Shock

PC 6170 specifications

Acnodes PC 6170 is a robust and versatile industrial computer specifically designed to meet the demanding requirements of various industrial applications. It brings together cutting-edge technology and durability, making it an ideal choice for environments that require reliability and performance.

One of the main features of the Acnodes PC 6170 is its compact and fanless design. This feature not only reduces the chances of mechanical failure due to moving parts but also allows for silent operation, which is beneficial in environments where noise reduction is essential. Its sleek aluminum chassis provides excellent thermal management, ensuring that the system operates efficiently even under heavy loads.

The Acnodes PC 6170 is powered by an Intel processor, offering a range of configurations that include options for Core i3, i5, and i7 CPUs. This flexibility allows users to choose the performance level that best meets their specific application needs, whether it's for basic data processing or resource-intensive applications such as machine vision or AI.

In terms of memory and storage, the PC 6170 supports up to 32GB of DDR4 RAM, allowing for multitasking and efficient processing of large datasets. Its storage options include SSDs and HDDs, providing ample space for applications and data while ensuring faster boot times and data access speeds typical of solid-state drives.

Connectivity is another key aspect of the Acnodes PC 6170. It features multiple USB ports, including USB 3.0 for high-speed data transfer, as well as serial and parallel ports, which are crucial for interfacing with legacy systems and devices in industrial settings. Additionally, it offers Ethernet ports for stable network connections and optional wireless capabilities for more flexible deployment.

The PC 6170 is built to withstand the rigors of industrial environments. It has a wide operating temperature range, allowing it to function effectively in extreme conditions. This durability is essential for applications found in manufacturing, factory automation, transportation, and outdoor installations.

Moreover, the Acnodes PC 6170 supports various operating systems, including Windows and Linux, providing users with flexibility based on their software requirements. Its versatility extends to compatibility with different peripheral devices, making it a universal solution for many industrial applications.

In summary, the Acnodes PC 6170 stands out as a powerful industrial computer, boasting features like a compact design, Intel processing power, extensive connectivity options, and robust durability. Its adaptability to various industrial environments makes it a go-to solution for businesses looking to enhance their operational efficiency with reliable computing power.