Lenovo T430SI, 2355AK4 manual Config menu, Uefi secure boot

•UEFI secure boot

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup program main menu.

The following table lists the Config menu items.

Notes:

•Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.

•On each submenu, press the Enter key to show selectable options and select a desired option by using cursor key, or type desired values from the keyboard directly.

•Some items are displayed on the menu only if the computer supports the corresponding features.

Table 5. Config menu items

Menu item	Submenu item	Value		Comments
Network	Wake On LAN	•	Disabled	Enable the system to Power
		•	AC only	on when the Ethernet
				controller receives a magic
		•	AC and Battery
				packet.
				If you select AC Only, Wake
				on LAN is enabled only
				when ac power adapter is
				attached.
				If you select AC and
				Battery, Wake On LAN is
				enabled with any power
				sources.
				Note: AC is required with
				magic packet type Wake on
				LAN.
				Note: Wake on LAN
				function does not work
				when a hard disk password
				is set.
	Ethernet LAN Option ROM	•	Disabled	Load the Ethernet LAN
		•	Enabled	Option ROM to enable
	(for Legacy Only boot			startup from an integrated
	mode or Both with Legacy			network device.
	first)
	UEFI IPv4 Network Stack	•	Disabled	Enable or disable Internet
		•	Enabled	Protocol Version 4 (IPv4)
	(for UEFI Only boot mode			network stack for the UEFI
	or Both with UEFI first)			environment.
	UEFI IPv6 Network Stack	•	Disabled	Enable or disable Internet
	(for UEFI Only boot mode	•	Enabled	Protocol Version 6 (IPv6)
	or Both with UEFI first)			network stack for UEFI
				environment.

116User Guide