Lenovo T430SI, 2355AK4 manual Fingerprint, External, Internal, Enter

Table 6. Security menu items (continued)

Menu item	Submenu item	Value		Comments
				computer goes ahead and loads the operating
				system. To prevent unauthorized access, set the
				user authentication on the operating system.
	Password at restart	•	Disabled	If you select and enable Password at restart,
		•	Enabled	a password prompt is displayed when you
				restart the computer. If you select Disabled, no
				password prompt is displayed; the computer
				goes ahead and loads the operating system.
				To prevent unauthorized access, set the user
				authentication on the operating system.
	Power-On Password	•	Disabled	See “Power-on password” on page 48.
		•	Enabled
	Hard Disk x Password	•	Disabled	See “Hard disk passwords” on page 48.
		•	Enabled	Notes:
				• Hard Disk 1 means the hard disk drive built
				into your computer.
				• Hard Disk 2 is displayed on the Password
				submenu only if a secondary hard disk drive is
				installed in the Serial Ultrabay Slim bay.
Fingerprint	Predesktop	•	Disabled	Enable or disable fingerprint authentication before
	Authentication	•	Enabled	the operating system is loaded.
	Reader Priority	•	External ➙	If External ➙ Internal is selected, an external
			Internal	fingerprint reader is used if attached. Otherwise,
		•	Internal Only	an internal fingerprint reader is used. If Internal
				Only is selected, an internal fingerprint reader is
				used.
	Security Mode	•	Normal	If fingerprint authentication fails, you still can start
		•	High	the computer by entering a password. If you have
				selected Normal, enter a power-on password or
				a supervisor password; if you have selected High,
				enter a supervisor password.
	Password	•	Disabled	Enable or disable password authentication. If
	Authentication	•	Enabled	high security mode is selected, this item appears.
	Reset Fingerprint Data	•	Enter	This option is used to erase all fingerprint data
				stored in the fingerprint reader and reset settings
				to the factory state (For example, Power-on
				security, LEDs, and so on.) As a result, any
				power-on security features previously enabled
				will not be able to work until they are re-enabled
				in the fingerprint software.

Chapter 8. Advanced configuration 123