Epson 610 manual Precautions, Tools, Screws

EPSON Perfection 610 Revision B

4.1 Overview

This chapter describes procedures for disassembling the EPSON Perfection 610. Unless otherwise specified, the scanner can be disassembled by reversing the disassembly procedures.

4.1.1 Precautions

WA R Disconnect the power cable before disassembling or

assembling the scanner.

When servicing, note the points below:

C A U T I O N

Consider the size of the scanner and make enough ￿room for servicing.

Since this scanner is a precision equipement, service it on a flat, level, heavy-duty table.

The directions used in this chapter are defined as shown in Figure 4-1.

4.1.2 Tools

Use the tools specified in Table 1-1.

Table 4-1. Tools

Names	Availability	Part Number
Phillips screw driver (#2)		B743800200
Standard screw driver		B743000100
Pliers		B740400100
Tweezers	￿	B641000100

4.1.3 Screws

The screws used in the scanner are as shown in Table 4-2.Make sure you always use the correct type and number of screws for the assembling part. See Table 4-3for the screw appearances.

Table 4-2. Screw Specifications

Abbreviation	Description
CP	Cross-recessed Pan Head screw
CBS	Cross-recessed Binding Head S-tite screw
CCP	Cross-recessed Cup Head P-tite screw

I n s id e

R e a r ( B a c k )

Table 4-3. Screw Appearances

Head appearance

TypeWasher

Top Side

R ig h t L e f t

F r o n t

E P S O N

Figure 4-1. Directions

Cross- recessed

Binding

Pan

Cup

Standard

- - - -

S-tite

B-tite

P-tite

With Outside Toothed lock washer

With Spring lock washer

Assembly and Disassembly Overview 26