EPSON Perfection 610 | Revision B |
4.2.8 Panel Board Removal
1.Release the Carriage Lock. (See Section 4.2.1.)
2.Remove the Document Cover. (See Section 4.2.2.)
3.Remove the Upper Housing. (See Section 4.2.3.)
4.Remove the screw (gold, CBS, M3x4).
C H E | In the following steps, manually move the carriage |
|
P O I | back and forth slowly if necessary. | Connector |
5. Disconnect the locking connector (pull and release) for the Panel
Board from the Power Supply Board, and then remove the Panel | CBS Screw (M3x4) | Panel Board |
|
Board.
Figure 4-30. Panel Board Removal
Assembly and Disassembly | Disassembly Procedures | 40 |