Metrologic Instruments MX003, MS6130 manual Visual Indicators

Page 28

VISUAL INDICATORS

The scanner has red and green LEDs. When the scanner is on, the LEDs indicate the status of the scan and scanner.

No Red or Green

The scanner will turn off if the scanner has

 

 

 

 

 

 

been dormant for a specified time. To

 

 

 

 

 

 

reactivate the unit, direct the output window

 

 

 

 

 

 

up then down toward the bar coded product.

 

 

 

 

 

 

If the unit has been dormant for longer than

 

 

 

 

 

 

 

 

 

 

 

 

10 minutes, reactivating the unit by pressing

 

 

 

 

 

 

the button on the side of the MS6130 will be

 

 

 

 

 

 

necessary.

Red Flash; Green Flash;

When the scanner first receives power, the

 

 

 

 

 

 

steady red LED will flash, followed by the

 

 

 

 

 

 

green LED.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steady Red

When the laser is on, the red LED will also be

 

 

 

 

 

 

on. This occurs when an object is in the scan

 

 

 

 

 

 

field. If the scanner does not detect a bar

 

 

 

 

 

 

code within approximately 2.5 seconds, the

 

 

 

 

 

 

red LED will shut off indicating that the laser is

 

 

 

 

 

 

no longer on. If the red LED remains on for

 

 

 

 

 

 

longer than 7.5 seconds, then the scanner is

 

 

 

 

 

 

in program mode.

Steady Red; Green Flash

When the scanner successfully reads a bar

 

 

 

 

 

 

code, the green LED will flash. If the green

 

 

 

 

 

 

LED does not flash, then the bar code read

 

 

 

 

 

 

was not successful.

 

 

 

 

 

 

 

Repetitive Red Flashes

When the red LED flashes several times while

 

 

 

 

 

 

it lays upon a stationary surface, then an

 

 

 

 

 

 

object is within the scan field and is activating

 

 

 

 

 

 

the IR sensor. This can occur even while the

 

 

 

 

 

 

scanner is lying upon the counter or cradle.

 

 

 

 

 

 

 

 

 

 

 

 

To eliminate this disturbance, direct the scan

 

 

 

 

 

 

window toward a different location.

24

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Metrologic INSTRUMENTS, INC Locations Table of Contents Table of Contents MS6130 Hand Held BAR Code Scanner MX003 Series Scanner Interfaces Transmitter Group Unpacking ListReceiver Group Connections of the Mxnterfacei to the Host Device Except versionConnections of the Keyboard Wedge Mxnterfacei to the PC Version 17 onlyConnections of the MS700I/MS720I With Mxto the Host Device Configuration of the MS700I/MS720I with MX Page Configuration of the Mxto the Scanpal Data Collector Page Keyboard Wedge KB Interface KB Parameter Keyboard TypeKB Parameter Keyboard Type KB Parameter Caps Lock Mode KB Parameter Alt Mode Microsecond DelayMillisecond Delay Millisecond Delay KB Parameter XT Clean-Up BitConfiguration of the MS6130 HAND-HELD Enabling the MS700I/MS720I SCANNER’S RF LOW Speed Option Changing the ID Handset /XMatching Procedure Parts of the MS6130 HAND-HELD BAR Code Scanner Output WindowComponents of the MS6130 Series Stand Installation of the MS6130 Series Stand Installation of the 6000 Series Universal Charging Stand Permanent Counter TOP InstallationNicd Battery Charger with Reconditioning Feature Recommended USEVisual Indicators Audible Indicators One BeepRazzberry Tone Two BeepsAudible Indicators Maintenance LabelsTroubleshooting Specifications Appendix aMX003 Series Scanner Interface Specifications Temperature Characteristics Degrees Celsius of each Cell Default Settings of the MS6130 and MX Receiver Appendix BRTS/CTS UPC EAN Parameter Transmitter Default Keyboard Receiver Wedge MX003 Series Scanner Interface Pin Assignments Appendix CPin Function Warranty and Disclaimer Appendix DAppendix E Appendix F PatentsIndex ESDTroubleshooting
Top Page Image Contents