Metrologic Instruments MS6130 manual MX003 Series Scanner Interfaces

Page 6

MX003 SERIES SCANNER INTERFACES

Metrologic’s MX003 Series Scanner Interfaces provide a short range, one- way wireless data communication link between a remote portable scanner and an RS-232 or light pen host device. Specifically, Metrologic’s MS6130 Hand-Held Laser Scanners include a Liberty® RF transmitter board.

Metrologic’s MS700i/MS720i series scanners, TECH series scanners may

be connected to a MX Series scanner interface. The “MX” scanner interface includes a RF receiver and a digital interface board.

The MS6130 scanner provides two functions:

Scans and decodes bar codes

Transmits scanned data to the RF receiver or “MX”

When the “MX” interface is connected to aScanPal® or host device such as a portable data terminal (PDT), it provides two functions

(For example, refer to Figure 1):

Performs the RF receiver function; for example, beeps to show it has received data from the transmitter

Communicates with the host device

In this manual, MX003 series scanner interfaces may be referred to as the “MX”, “MX” interface or receiver. Suffix of the MX003 model designation will vary due to country of usage.

Any RS-232C or

MS6130 with Liberty® RF

Light Pen Device with

Scanner Interface (Transmitter)

MX003 RF Receiver

 

Up to 30 Ft.

(conditions permitting)

Figure 1

2

Image 6
Contents Metrologic INSTRUMENTS, INC Locations Table of Contents Table of Contents MS6130 Hand Held BAR Code Scanner MX003 Series Scanner Interfaces Unpacking List Transmitter GroupReceiver Group Connections of the Mxnterfacei to the Host Device Except versionConnections of the Keyboard Wedge Mxnterfacei to the PC Version 17 onlyConnections of the MS700I/MS720I With Mxto the Host Device Configuration of the MS700I/MS720I with MX Page Configuration of the Mxto the Scanpal Data Collector Page Keyboard Wedge KB Interface KB Parameter Keyboard TypeKB Parameter Keyboard Type KB Parameter Caps Lock Mode Millisecond Delay KB Parameter Alt ModeMicrosecond Delay Millisecond Delay KB Parameter XT Clean-Up BitConfiguration of the MS6130 HAND-HELD Enabling the MS700I/MS720I SCANNER’S RF LOW Speed Option Changing the ID Handset /XMatching Procedure Parts of the MS6130 HAND-HELD BAR Code Scanner Output WindowComponents of the MS6130 Series Stand Installation of the MS6130 Series Stand Installation of the 6000 Series Universal Charging Stand Permanent Counter TOP InstallationNicd Battery Charger with Reconditioning Feature Recommended USEVisual Indicators Razzberry Tone Audible IndicatorsOne Beep Two BeepsAudible Indicators Maintenance LabelsTroubleshooting Specifications Appendix aMX003 Series Scanner Interface Specifications Temperature Characteristics Degrees Celsius of each Cell Default Settings of the MS6130 and MX Receiver Appendix BRTS/CTS UPC EAN Parameter Transmitter Default Keyboard Receiver Wedge Appendix C MX003 Series Scanner Interface Pin AssignmentsPin Function Warranty and Disclaimer Appendix DAppendix E Appendix F PatentsIndex ESDTroubleshooting