Canon DR-5060F manual Backup key, Space/Trailer key, Count Only key, Clear/Stop key, New File key

Page 17

(3) Backup key

This key displays and changes the scanner operation mode:

Lit (Backup mode): In this mode, scanned images are being photographed on microfilm while they are being transferred to computer.

Out (Scanner Only mode): In this mode, scanned images are not photographed to microfilm.

Blinking (Filmer Only mode): In this mode, scanned images are not transferred to computer, and are only photographed to microfilm.

The default setting for this scanner is the Backup mode. Pressing this key turns the lamp in the key OFF and sets the scanner to the Scanner Only mode, and holding this key down for five seconds sets the scanner to the Filmer Only mode.

(4) Space/Trailer key

This key is enabled in the backup and film only modes when the camera unit is placed on this unit. Pressing this key takes up spaces on the film. Holding this key down for three seconds feeds the trailer film so that the film can be taken out of the camera unit. During taking up of spaces and feeding of trailer film, the rightmost LED on the remaining film indicator blinks and the Start key turns to red.

(5) Count Only key

Pressing this key lights the lamp in the key and sets the Count Only mode. In this mode, document pages that are fed are neither scanned nor photographed. They are only counted. For details on this mode, see page 41 “Count Only mode.”

(6) Clear/Stop key

This key is used to stop scanning midway, cancel the operation mode you have set, and to cancel errors displayed on the counter display.

Holding this key down for at least two seconds clears the count displayed on the counter display. If the counter display is set for odometer indication, the currently displayed odometer value is cleared. If the counter display is set for file address indication or page address indication, both the file address and page address are cleared.

(7) New File key

Pressing this key notifies the scanner and filmer of a new file.

When you press this key and start scanning the next document, the images sent to the computer are saved in a different folder or under a different name to the previously scanned document, and the file mark is photographed on the film to indicate a new file.

MEMO

In the Backup mode and Scanner Only mode, the image to be saved or the new file mark is controlled according to the settings on the application. For details on application settings, refer to the separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility 5060 Instructions.”

1

About DR -5060F

Names and Functions of Parts 15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Instructions FCC Regulations For 120V models Introduction Filmer This UnitScanner Contents Specifications Options Consumables Index Chapter TroubleshootingChapter Daily Cleaning Daily maintenance Safety PrecautionsSafety Precautions About the Installation Location Carrying About the Power SupplyChapter Features of DR-5060F About DR -5060F Packaging What’s in the Box?Front view Names and Functions of PartsRear view Inside with upper unit openFunction keys Remaining film indicatorOperation panel Space/Trailer key Backup keyCount Only key Clear/Stop keyStart key Indicator lampsFeeding Option key Brightness keyFunction key labels Removable trayDocument eject support plate About the Camera Unit Preparation Before Use System Requirements Preparation Bef ore Use Connecting to a ComputerConnecting the Scsi Cable Setting the Scsi ID Setting the Scsi ID and TerminatorSetting the terminator Connecting the power cord Connecting the Power Cord and Ground CableLoading Film Handling the Camera UnitPress the release notch to open the camera unit’s cover Take the microfilm out of its caseClose the left cover taking care not to nip the film Preparation Bef ore Use Affixing the Index Label Push the camera unit down onto the main unit Loading the Camera Unit in the DR-5060FRemoving the Camera Unit Press the release notch to open the cover on the right Removing FilmRemove the film Store the film in its case Document tray extension Preparing for Paper Feeding and EjectionAffixing the Document Guide Labels Document eject tray extension Open the extension wireDocument eject support plate Paper Feed Adjustment Turning the Power on Turning the Power ON/OFFTo turn this unit ON, press the power switch Turn the computer onTurn the computer OFF before you turn the scanner OFF Turning the Power OFFPreparing Documents Backup key lit Backup mode Checking the Operation ModeBackup key out Scanner Only mode Backup key blinking Filmer Only modeWhen counting ends, press the Count Only key to cancel Count Only key lit Count Only modeCount Only mode Preparing DocumentsTypes of Documents About DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Semi-Auto Is lowered when scanning of all pages in the document endsSemi-Auto Inserted first into the scannerAuto Sensor Manual To end scanning, press the Stop key Insert the document one page at a timeFunction Key Settings Press the blinking function key again Manual Thickness AdjustmentPress the or key to adjust the paper thickness Double Feed Detection Fixed Thickness ModeImprinter Restore Memorized SettingFilm Density Odometer IndicationUser Mode Setup Items Setting in the User ModeSpace feed setting Endorser stamp mode settingLeader feed setting Trailer settingSelect the user mode address using the or key How to Set the User modeWhen the final letter of the user mode setting is a number When the final letter of the user mode setting isTroubleshooting When the Scanner is Not Recognized Removing Paper Jams TroubleshootingPaper Jam in the Paper Eject Section Eject tray extension if it is openPage Check the intermediate unit for jammed paper Paper Jam in the Feed SectionRemove the jammed paper from the feed section Press the open/close button, and lift up the feed unitGently close the upper unit Removing the Intermediate Unit Push the intermediate unit down Attaching the Intermediate UnitCondition Double feed cannot be detected Paper Feed TroubleCondition Paper jam has occurred Troubleshooting Cause Scanning glasses and rollers on the scanner are dirty When the Scanned Image is Not NormalCause Scan conditions are inappropriate Cause Driver or application does not run correctlyWhen an Error Code is Displayed Cause Lamp has reached the end of its service life Cause Endorser option connection errorCause Document was skewed Cause Scanner paper jamAbout the Remaining Film Warning Page Daily Cleaning Cleaning the Main Unit Daily CleaningDaily Cleaning Cleaning the Scanning Glasses and RollersOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Power Cord Cleaning the Camera UnitImprinter Guide Plate SCSI-II SpecificationsEndorser ED600 Camera unitImprinter Barcode DecoderIndex Auto Backup keySCSI-ID User mode setting Page PUB.CE-IE-986
Related manuals
Manual 87 pages 44.13 Kb

DR-5060F specifications

The Canon DR-5060F is a high-performance document scanner designed primarily for professional environments that require fast, efficient, and reliable document management. This unit stands out due to its blend of advanced technology, usability, and robust features, making it an ideal choice for businesses that process large volumes of documents.

One of the main features of the DR-5060F is its impressive scanning speed. It can scan up to 60 pages per minute in monochrome and 30 pages per minute in color, allowing users to digitize documents quickly and keep operations moving smoothly. This speed does not compromise quality; the scanner produces high-resolution images at up to 600 dpi, ensuring crisp text and detailed graphics that are essential for professional documentation.

The DR-5060F leverages Canon's patented image processing technology, including OCR (Optical Character Recognition). This feature transforms scanned text into editable and searchable formats, greatly enhancing productivity and ease of access. Additionally, the scanner is equipped with Automatic Document Feeder (ADF) that can handle up to 50 sheets at a time. This allows for continuous scanning, providing significant time savings for users.

One of the key characteristics of the DR-5060F is its versatility in handling various document types. The unit easily processes everything from thin or fragile documents to thicker presentations, making it suitable for various applications, including legal, healthcare, and financial services. Furthermore, it supports duplex scanning, enabling double-sided documents to be captured in a single pass.

Another notable technology is the "Active Image Context" feature, which optimizes image quality by automatically adjusting brightness and contrast for each page. This ensures that every scanned document appears clear and professional while minimizing the need for manual adjustments.

In terms of connectivity, the Canon DR-5060F seamlessly integrates with different document management systems. It is compatible with TWAIN drivers, ensuring broad compatibility with many business applications. Moreover, it supports USB connections for easy setup and operation.

In summary, the Canon DR-5060F is a powerful document scanner that merges cutting-edge technology with user-friendly features. Its high-speed capabilities, enhanced image processing, and versatility make it an invaluable asset for businesses looking to improve their document management workflows. Whether for archives, record-keeping, or digitalization projects, the DR-5060F is poised to deliver exceptional performance and efficiency.
Top Page Image Contents