Canon DR-5060F manual Connecting to a Computer, Connecting the Scsi Cable, Preparation Bef ore Use

Page 23

Connecting to a Computer

Connect the scanner to the computer.

CAUTION

Before you connect the scanner to the computer, be sure to turn both the scanner and the computer OFF.

Connecting the SCSI Cable

Connect your computer to the scanner using the SCSI cable.

Two half-pitch 50-pin SCSI connectors are located on the rear of the scanner. Insert the SCSI cable from the computer into one of these connectors.

To connect another SCSI device to the computer, insert the other SCSI cable into the vacant SCSI connector on the rear of the scanner, and connect the other end of the SCSI cable into the SCSI device in a daisy chain.

Insert into either of

these two ports.

Half-pitch 50-pin (pin type)

2

Preparation Bef ore Use

Connecting to a Computer 21

Image 23

Contents

Instructions FCC Regulations For 120V models Introduction Filmer This UnitScanner Contents Specifications Options Consumables Index Chapter TroubleshootingChapter Daily Cleaning Daily maintenance Safety PrecautionsSafety Precautions About the Installation Location Carrying About the Power SupplyChapter Features of DR-5060F About DR -5060F Packaging What’s in the Box?Front view Names and Functions of PartsRear view Inside with upper unit openFunction keys Remaining film indicatorOperation panel Clear/Stop key Backup keySpace/Trailer key Count Only keyBrightness key Indicator lampsStart key Feeding Option key Function key labels Removable tray Document eject support plate About the Camera Unit Preparation Before Use System Requirements Preparation Bef ore Use Connecting to a ComputerConnecting the Scsi Cable Setting the Scsi ID Setting the Scsi ID and TerminatorSetting the terminator Connecting the power cord Connecting the Power Cord and Ground CableTake the microfilm out of its case Handling the Camera UnitLoading Film Press the release notch to open the camera unit’s coverClose the left cover taking care not to nip the film Preparation Bef ore Use Affixing the Index Label Push the camera unit down onto the main unit Loading the Camera Unit in the DR-5060FRemoving the Camera Unit Press the release notch to open the cover on the right Removing FilmRemove the film Store the film in its case Document tray extension Preparing for Paper Feeding and EjectionAffixing the Document Guide Labels Document eject tray extension Open the extension wireDocument eject support plate Paper Feed Adjustment Turn the computer on Turning the Power ON/OFFTurning the Power on To turn this unit ON, press the power switchTurn the computer OFF before you turn the scanner OFF Turning the Power OFFPreparing Documents Backup key blinking Filmer Only mode Checking the Operation ModeBackup key lit Backup mode Backup key out Scanner Only modePreparing Documents Count Only key lit Count Only modeWhen counting ends, press the Count Only key to cancel Count Only modeTypes of Documents About DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Inserted first into the scanner Is lowered when scanning of all pages in the document endsSemi-Auto Semi-AutoAuto Sensor Manual To end scanning, press the Stop key Insert the document one page at a timeFunction Key Settings Press the blinking function key again Manual Thickness AdjustmentPress the or key to adjust the paper thickness Double Feed Detection Fixed Thickness ModeOdometer Indication Restore Memorized SettingImprinter Film DensityUser Mode Setup Items Setting in the User ModeTrailer setting Endorser stamp mode settingSpace feed setting Leader feed settingWhen the final letter of the user mode setting is How to Set the User modeSelect the user mode address using the or key When the final letter of the user mode setting is a numberTroubleshooting When the Scanner is Not Recognized Eject tray extension if it is open TroubleshootingRemoving Paper Jams Paper Jam in the Paper Eject SectionPage Check the intermediate unit for jammed paper Paper Jam in the Feed SectionRemove the jammed paper from the feed section Press the open/close button, and lift up the feed unitGently close the upper unit Removing the Intermediate Unit Push the intermediate unit down Attaching the Intermediate UnitCondition Double feed cannot be detected Paper Feed TroubleCondition Paper jam has occurred Troubleshooting Cause Driver or application does not run correctly When the Scanned Image is Not NormalCause Scanning glasses and rollers on the scanner are dirty Cause Scan conditions are inappropriateWhen an Error Code is Displayed Cause Scanner paper jam Cause Endorser option connection errorCause Lamp has reached the end of its service life Cause Document was skewedAbout the Remaining Film Warning Page Daily Cleaning Cleaning the Main Unit Daily CleaningDaily Cleaning Cleaning the Scanning Glasses and RollersOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Power Cord Cleaning the Camera UnitImprinter Guide Plate SCSI-II SpecificationsBarcode Decoder Camera unitEndorser ED600 ImprinterIndex Auto Backup keySCSI-ID User mode setting Page PUB.CE-IE-986

Related manuals

Manual 87 pages 44.13 Kb