Canon DR-5060F manual FCC Regulations For 120V models

Page 2

FCC REGULATIONS (For 120V models)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

RADIO INTERFERENCE REGULATIONS (For 120V models)

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the Interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120V models)

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003 édictée par l’Industrie Canada.

Für EMVG

Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen.

NOTICE

qCopyright© 2001 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior permission of CANON

ELECTRONICS INC.

wThe contents of this manual are subject to change without notice.

eEvery effort has been made to ensure the accuracy of information presented in this manual. However, Canon Electronics Inc. and the subsidiaries on the back cover assume no responsibility for any errors or their consequences.

rWe do not assume any responsibility for damage resulting from operations regardless of item e.

Trademarks and Registered Trademarks

Microsoft WindowsR and Microsoft Windows NTR are registered trademark of Microsoft Corporation in the U.S. and in other countries.

ISISR is a registered trademark of Pixel Translation, a division of ActionPoint Inc.

Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Image 2 Contents
Instructions FCC Regulations For 120V models Introduction Filmer This UnitScanner Contents Specifications Options Consumables Index Chapter TroubleshootingChapter Daily Cleaning Safety Precautions Daily maintenanceSafety Precautions About the Installation Location About the Power Supply CarryingChapter Features of DR-5060F Packaging What’s in the Box? About DR -5060FNames and Functions of Parts Front viewInside with upper unit open Rear viewFunction keys Remaining film indicatorOperation panel Count Only key Backup keySpace/Trailer key Clear/Stop keyFeeding Option key Indicator lampsStart key Brightness keyFunction key labels Removable trayDocument eject support plate About the Camera Unit Preparation Before Use System Requirements Preparation Bef ore Use Connecting to a ComputerConnecting the Scsi Cable Setting the Scsi ID and Terminator Setting the Scsi IDSetting the terminator Connecting the Power Cord and Ground Cable Connecting the power cordPress the release notch to open the camera unit’s cover Handling the Camera UnitLoading Film Take the microfilm out of its caseClose the left cover taking care not to nip the film Preparation Bef ore Use Affixing the Index Label Loading the Camera Unit in the DR-5060F Push the camera unit down onto the main unitRemoving the Camera Unit Removing Film Press the release notch to open the cover on the rightRemove the film Store the film in its case Document tray extension Preparing for Paper Feeding and EjectionAffixing the Document Guide Labels Open the extension wire Document eject tray extensionDocument eject support plate Paper Feed Adjustment To turn this unit ON, press the power switch Turning the Power ON/OFFTurning the Power on Turn the computer onTurning the Power OFF Turn the computer OFF before you turn the scanner OFFPreparing Documents Backup key out Scanner Only mode Checking the Operation ModeBackup key lit Backup mode Backup key blinking Filmer Only modeCount Only mode Count Only key lit Count Only modeWhen counting ends, press the Count Only key to cancel Preparing DocumentsAbout Documents Types of DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Semi-Auto Is lowered when scanning of all pages in the document endsSemi-Auto Inserted first into the scannerAuto Sensor Manual Insert the document one page at a time To end scanning, press the Stop keyFunction Key Settings Press the blinking function key again Manual Thickness AdjustmentPress the or key to adjust the paper thickness Fixed Thickness Mode Double Feed DetectionFilm Density Restore Memorized SettingImprinter Odometer IndicationSetting in the User Mode User Mode Setup ItemsLeader feed setting Endorser stamp mode settingSpace feed setting Trailer settingWhen the final letter of the user mode setting is a number How to Set the User modeSelect the user mode address using the or key When the final letter of the user mode setting isTroubleshooting When the Scanner is Not Recognized Paper Jam in the Paper Eject Section TroubleshootingRemoving Paper Jams Eject tray extension if it is openPage Paper Jam in the Feed Section Check the intermediate unit for jammed paperPress the open/close button, and lift up the feed unit Remove the jammed paper from the feed sectionGently close the upper unit Removing the Intermediate Unit Attaching the Intermediate Unit Push the intermediate unit downCondition Double feed cannot be detected Paper Feed TroubleCondition Paper jam has occurred Troubleshooting Cause Scan conditions are inappropriate When the Scanned Image is Not NormalCause Scanning glasses and rollers on the scanner are dirty Cause Driver or application does not run correctlyWhen an Error Code is Displayed Cause Document was skewed Cause Endorser option connection errorCause Lamp has reached the end of its service life Cause Scanner paper jamAbout the Remaining Film Warning Page Daily Cleaning Daily Cleaning Cleaning the Main UnitCleaning the Scanning Glasses and Rollers Daily CleaningOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Cleaning the Camera Unit Power CordImprinter Guide Plate Specifications SCSI-IIImprinter Camera unitEndorser ED600 Barcode DecoderAuto Backup key IndexSCSI-ID User mode setting Page PUB.CE-IE-986
Related manuals
Manual 87 pages 44.13 Kb