Function Menu

OPERATING INSTRUCTIONS (continued)

ENGLISH

Selected characters

▼

Setup hint

This moves the picture around the screen in small amounts, at set

intervals, to reduce the panel image retention. Image retention

Screen Saver

Off

5Min.

10Min.

occurs when stationary objects, such as screen logos, leave a slight

60Min.

40Min.

20Min.

image visible after they should have disappeared.

This is used to reduce the panel image retention that can occur with

Screen Wipe

60Min.

stationary pictures by displaying a completely white screen. Select

On (continuous operation) or 60 Min. (time limit operation) and press

the OK button. Press the MENU or RETURN button on the remote

control to return to normal viewing.

This turns the gray sidebars On/Off when watching normal mode

Black Side Panel

Off

screen size area. It is always set to Off when the monitor is powered

On. It is recommended to set Black Side Panel to off to reduce the

panel image retention.

Video Power Save

Optional (grayed out)

Freeze Mode

Optional (grayed out)

Default Zoom

Optional (grayed out)

Reset

(Selects the Reset mode)

The original factory settings for the items of this Menu page can be

restored by pressing the OK button.

This function suppresses the contrast of the screen regardless of the

Contrast setting in the Picture Menu. By this control, power

Panel Life

Normal

Extend 1

Extend 2

consumption can be reduced or degradation of a panel can be

mitigated. The order of power consumption is Extend 2 < Extend 1 <

Normal.

If the Contrast setting is changed when this item is set to Extend 1 or

2, it will be changed to Normal automatically.

This functions displays the Input Signal Screen Display every time the

Mode Display

Off

input mode and signal mode are changed.

Set to OFF if the Input Signal Screen Display is not needed when

switching signals.

ID Number

Assigns ID nos. to the monitors so that they can be controlled

individually (up to 7 monitors can be controlled).

This function changes each level of RGB signal invert to reduce the

Inverse

60Min.

panel image retention. When this function is required, select On

(continuous operation) or 60Min. (time limit operation) and press the

OK button. And press the Menu or Return button to exit.

Off

15Min.

30Min.

This function is also provided to prevent image retention. If time is set

Standby White

for this item, the screen changes into a white pattern when the

120Min.

60Min.

monitor enters power save mode, and continues for the period of

setting time.

Gamma

2.2

2.8

Normally set to 2.2.

	Function
		Screen Saver
OK		Screen Wipe
		Black Side Panel
		Video Power Save
		Freeze Mode
		Default Zoom
		Reset
		Select	Set