Yamaha PDM-4210E user manual Setup Menu, Movie

OPERATING INSTRUCTIONS (continued)

SETUP MENU

	Picture
	Audio
	Timer
MENU	Function
	Setup
	Language
	Select
	OK Set

	Setup
	Auto Adjust		Adjust
OK	Horizontal Position		0
	Vertical Position		+ 31
	Horizontal Clock		– 20
	Clock Phase		10
	Reset		Reset
	Select	Return	Exit

Setup
Auto Adjust		Adjust
Horizontal Position		0
Vertical Position		+ 31
Horizontal Clock		– 20
Clock Phase		10
Reset		Reset
Select	Return	Exit

Setup
Input Level		0.7V
Frequency Display		Off
WVGA Type		Off
Vertical Filter		On
Frequency Mode		Movie
RGB1		DVI-PC
RGB2		RGB
Select	Set	Return

OK

OK

Horizontal Position		0
Next / Prev	Adjust	Return

Clock Phase		10
Next / Prev	Adjust	Return

Selected characters

Auto Adjust*

Horizontal Position

Vertical Position

Horizontal Clock

Clock Phase

Reset

Input Level

Frequency Display

WVGA Type

Vertical Filter

Frequency Mode

RGB1

RGB2

	▼								▼		Setup hint
	(Menu)							(Adjust)			Horizontal Position, Vertical Position, Horizontal Clock and Clock
				Press the OK button to start
											Phase are adjusted automatically.
				automatic regulation.
Moves the horizontal position				Moves the horizontal position							Adjust the left-side display position.
to left.				to right.
											(This function is only for RGB2. It is not available (grayed out) for
											RGB1.)
Moves down the vertical				Moves up the vertical position.							Adjust the vertical display position.
position.
											(This function is only for RGB2. It is not available (grayed out) for
											RGB1.)
Reduces the dot clock				Increases the dot clock
frequency (shrinks the right				frequency (expands the right							Adjust for maximum character clarity.
side).				side).
											(This function is only for RGB2. It is not available (grayed out) for
											RGB1.)
Slows the dot clock phase				Advances the dot clock phase							Adjust for clear character visibility.
(shifts slightly to left).				(shifts slightly to right).
											(This function is only for RGB2. It is not available (grayed out) for
											RGB1.)
											The original factory settings for the items of this Menu page can be
				(Selects the Reset mode)
											restored by pressing the OK button. (This is effective only for RGB2.)
		0.7V					1.0V				Normally set to 0.7 V. If white is found to spread across the screen, set
											to 1.0 V. (This is effective only for RGB2.)
			Off		On						Set this to Off if the frequency information of the Input Signal Screen
											Display is not required.
			Off		On						This is only available for W-VGA signal.
											When it is set to On, the display area modecan be selected Full or
											Real.
			Off		On
											Turn On when concerned about screen flicker.
			Movie			PC					Set to Movie when viewing moving images on a personal computer.
										Optional (grayed out)
										Optional (grayed out)

* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.

20