Yamaha PDM-4210E Input connector pin specifications, Scart connector pin specifications, Not Used

PRODUCT SPECIFICATIONS (continued)

Signal Input

RGB terminal (D-sub 15-pin connector)

ENGLISH

Pin	Input signal
1	R (PR/CR)
2	G or sync on green (Y)
3	B (PB/CB)
4	No connection
5	No connection
6	R.GND (PR/CR, GND)
7	G.GND (Y, GND)
8	B.GND (PB/CB, GND)
9	No connection
10	GND
11	No connection
12	[SDA]
13	H. sync or H/V composite sync
14	V.sync. [V.CLK]
15	[SCL]

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

•When different kinds of input signals are simultaneously input to the monitor via a graphics board or the like, the monitor will automatically select the signals in the following priority order:

Sync signal type	Priority
H/V separate sync.	1
H/V composite sync.	2
sync.on Green *	3

*There may be instances when correct display is not possible, even when displaying the signals listed on the following page. In this case, use H/V separate sync, H/V composite sync.

( ) : With component input

S-input connector pin specifications

Pin	Input signal	3	1
1	Y
2	Y-GND	4	2
3	C
4	C-GND
Frame	GND

Scart connector pin specifications

Pin	Signal	Pin	Signal
1	AUDIO OUT (RIGHT)	12	Not Used
2	AUDIO IN (RIGHT)	13	RGB-R GND
3	AUDIO OUT (LEFT/MONO)	14	GND
4	AUDIO GND	15	RGB-R / S.VHS CHROMINANCE IN
5	RGB-B GND	16	BLANKING SIGNAL
6	AUDIO IN (LEFT/MONO)	17	COMPOSITE VIDEO GND
7	RGB-B IN	18	BLANKING SIGNAL GND
8	AUDIO/RGB SWITCH / 16:9	19	COMPOSITE VIDEO OUT
9	RGB-G GND	20	COMPOSITE VIDEO / S.VHS LUMINANCE IN
10	Not Used	21	GND / SHIELD (CHASSIS)

11RGB-G IN

20 18 16 14 12 10 8 6 4 2

21 19 17 15 13 11 9 7 5 3 1

41