OPERATING INSTRUCTIONS
The functions of the buttons located on the bottom of the monitor change as shown below:
POWER ON/OFF button
INPUT SELECT button
PROGRAM UP/DOWN buttons
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ▼ | ▼ | ▼ | ▼ |
|
|
| |
| MENU button |
| ||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT SELECT button |
| |||
|
|
|
| (OK button) |
| |||
|
|
|
|
|
| |||
|
| PROGRAM UP/DOWN button |
| |||||
|
| ( | SELECT button) |
| ||||
VOLUME UP/DOWN |
|
|
|
| RGB/VIDEO | |||
buttons |
|
|
|
|
|
| ||
|
|
|
|
|
| buttons | ||
( | ADJUST buttons) | |||||||
• ( ) indicates the function while the MENU is displayed on the screen.
| D / N |
|
|
| i + | I / II |
|
MENU |
| A / B | |
|
| P+ |
|
- |
| OK | + |
|
|
| |
|
| P- |
|
D V D |
|
|
|
|
|
| FREEZE |
|
|
| ZOOM |
1 |
| 2 | 3 |
4 |
| 5 | 6 |
7 |
| 8 | 9 |
|
| 0 |
|
AV1 | AV2 | AV3 | AV4 |
|
| RGB1 | RGB2 |
ENGLISH
VOLUME
UP/DOWN buttons
MUTE button
ZOOM button
PROGRAM SELECT buttons
Input Switching
•Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control. And the way to return to a TV channel is as follows:
•Pressing INPUT SELECT button at RGB2 input screen.
•Pressing some PROGRAM SELECT buttons and select a TV channel.
•Pressing PROGRAM UP/DOWN buttons at the screen without
•Input can be switched in the sequence of TV ➔ AV1 ➔ AV2 ➔ AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pressing the
INPUT SELECT button of the monitor or the remote control.
TV 
AV1 
AV2 
AV3
RGB2
RGB1
AV4 
Size Switching
Each time the ZOOM button of the remote control is pressed, the screen display size will change and the status will be displayed at the bottom of the screen.
• During TV mode
Auto 
Full 
Zoom
14:9Zoom
C14:9L
•[Auto] is a mode which uses WSS (Wide Screen Signals), which identify the picture format movies and programs are broadcast in.
Various broadcast stations now transmit WSS. It can be detected and the monitor will automatically switch to the correct format. However, some broadcasters do not transmit WSS, and in these cases monitor will not recognize which format is being transmitted. Therefore, the Default Zoom setting in the Function Menu is used to choose when a WSS has not been sent or has not been detected.
47