During Video signal input, Page1 Page2 Page3

OPERATING INSTRUCTIONS (continued)

SETUP MENU (continued)

Selected characters

Auto Tuning

Country

Manual Tuning

Position

(C--)

(S--) (--MHz)

Descrambler

Name

Sound System

Colour System

Skip

Fine Tuning

Sort

(Position list

designated rows)

Auto Off

▼

(Page1) (Page2) (Page3)

–

1	2	3••••••199	AV00
–			–
–			–
–			–
–			–

Off On

( :a letter)

BGIDK

L'L

AutoPALSECAM

NTSC3.58NTSC4.43

Off On

	Off		On
	Off		On

Decreasing the frequency		Increasing the frequency
Decreasing the frequency		Increasing the frequency
data for the main tuner		data for the main tuner.

–

Off On

Setup hint

Select the country name using the ▼ ▲ SELECT buttons and press OK button.

•If some required stations could not be preset using the auto tuning function, select and preset the required station in the required position using the manual tuning operation.

Press the OK button and it starts the auto tuning.

Set the position number. This also can be set by ▼ ▲ PROGRAM UP/DOWN buttons.

Select the channel entry method. Enter a two digit channel number (CH), a two digit S-band number, or a 3 digit frequency (MHz).

Use the 0-9 NUMBER buttons to enter a two digit number. If the number is a standard channel number, the unit begins searching for the channel.

Use the 0-9 NUMBER buttons to enter a two digit number. If the number is a standard S-band number, the unit begins searching for the channel.

Use the 0-9 NUMBER buttons to enter a three digit number. If the number is a standard frequency, the unit begins searching for the channel.

Set this to Off normally. If it is set to On, the AV4 (Scart) terminal operates as TV signal input, and the screen changes to display AV4 (Scart) input signal automatically.

This is used to input a 5 digit name for a TV station. After fixing the cursor on the first digit, select a letter by ▼ ▲ SELECT buttons and move to the next digit by ▼ ADJUST button. Press the OK button again when finished.

•Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank), ”,”(comma) and ”.”(period) .

Select one of 5 different settings for the sound system.

Select one of 5 different settings for the colour system.

If this is set to On, the selected position will be skipped while selecting positions by PROGRAM UP/DOWN buttons.

This is automatically set to On for non-broadcasting channels.

If this is set to On, it helps to reduce the noise interference visible on the screen, especially in weaker signal reception areas.

After completing fine-tuning, press the RETURN button to exit this mode.

•The variable range is -56 ~ +56.

Move the cursor to the row of the channel you wish to change, and press the OK button. The display characters change to green. Use the ▼ ▲ SELECT buttons to move the row to the disired location, and press the OK button when you have finished. Press the RETURN button to exit.

If this is set to On, the power will be turned off when there is no transmission signal and no operation for about 10 minutes in the TV mode.

[During VIDEO signal input]

1 item is added to the Menu shown in the page 39 .

Selected characters

Scart Output

▼

TV Monitor

Setup hint

TV:AV4 (Scart) output will be fixed as TV signal output. Monitor:AV4 (Scart) output can view the same image as displayed on the main unit. It is possible to monitor only the composite video signal from AV1, AV2, or AV3 input that is displayed on the screen at the time.

•If Descrambler is set to On, it will be fixed as TV automatically.