Brother PS-9000 user manual Specifications, Hardware specifications, Software specifications

Page 12

Specifications

Hardware specifications

■CPU

32bit RISC CPU

■Memory

RAM: 8 MBytes

Flash ROM: 1 MByte

■Network Interface 10BASE-T/100BASE-TX 1 port (automatic detection)

■USB Interface A Port

■Others

Push Button: 1 button

LED Indicators: 3 LEDs, one for Status (orange), one for 10BASE Link (green), and one for 100BASE Link (green)

Software specifications

■Supported Protocol

TCP/IP

■TCP/IP

Network Layer: ARP, RARP, ICMP, IP

Session Layer: TCP, UDP

Application Layer: LPR, FTP, BOOTP, HTTP,

DHCP

IP address can be set with Setup Utility.

Operation requirements

■Network Environment

Microsoft® Windows® 95/98/98SE/Me, Microsoft® Windows NT® 4.0, Microsoft® Windows® 2000 Pro, Microsoft® Windows®

XP

*Please note that the supported printer OS differ per model.

■Operating Environment Temperature: 5 °C to 35 °C

Humidity: 20% to 80% RH (no condensation allowed)

■Storage Environment Temperature: -10 °C to 50 °C

Humidity: 20% to 90% RH (no condensation allowed)

11

Image 12

Contents PS-9000 User’s Manual UK English Introduction PS-9000About this Manual ConventionsTable of Contents Appendix Safety Instructions About PS-9000 About PS-9000 Compatible modelsQL-500 QL-550 QL-650TD QL-1050 QL-1050N PT-9500PC PT-9200DX Declaration of ConformityParts and Functions TopBottom Power Connector BackRight side Network Port 10BASE-T/100BASE-TX Push ButtonConnection to the Network Prepare the following itemsUSB Cable Connectors Turn on the P-touchSpecifications Hardware specificationsSoftware specifications Operation requirementsUsing the PS-9000 in a Windows Environment Setup Starting the Brother PS-9000 UtilityReadme User’s GuideHow to Set Up the PS-9000 Installs this unit and the utilityInstalls the utility PS-9000 Setup Method Select the PS-9000 to be set up, and then click Next Specify the IP addressSelectport. if you want to set up the printer 8Specify the group name that will appear in the Start menuSelect the P-touch to be set up, and then click Next Setup configuration is displayed. Click FinishType in the printer port name, and then click Next Install the utility Install the printing client software After the setup preparations are finished, click Next Specify the group name that will appear in the Start menuIf the product is not displayed in the list, click Search Automatic IP address configuration with Dhcp Automatic IP address configuration with RarpOther Functions Uninstalling the Software Using the PS-9000 With a Different P-touchClickThe softwareYes. is uninstalled Using the PS-9000 in a Windows EnvironmentUsing the Web Browser Using the Web Browser Display the PS-9000 WebType the IP address of the PS-9000 in the Web browser Configuration Manage PS-9000 Via the WebDisplay Status Questions & Answers Questions & Answers SearchingOr Quick Editor Server. In this case, the IPTroubleshooting YesStatus LED orange Appendix Page Print Test Page dialog box, select No, and then click Finish Print using an LPR port in Microsoft Windows 2000 Pro Click NextPage Page Print using an LPR port in Microsoft Windows XP Page Page PS-9000 Settings Below are the settings for PS-9000Web Default