Brother PS-9000 Back, Right side, Network Port 10BASE-T/100BASE-TX Push Button, USB Port

Page 9

Back

Power Connector

LAN

USB

DC5V IN

Right side

Push Button

Network Port	USB Port
(10BASE-T/100BASE-TX)

■ Network Port (10BASE-T/100BASE-TX)		■ Push Button
Connection for the network cable.		Press this button to reset PS-9000 to its
*In 100BASE-TX environment, use category		factory default settings.
5.

■USB Port

Connection for the USB cable.

■Power Connector

Connection for the AC adapter.

■Factory Default Settings

1Make sure that the AC adapter is not connected to the PS-9000.

2While pressing the push button, connect the AC adapter to the PS-9000. The STATUS LED (orange) will blink once when the connection is made.

3Continue to press the push button for two seconds. The STATUS LED will blink again when the settings are successfully reset to the factory default settings. Release the push button.

Caution

●Do not turn off the PS-9000 while it is being initialized to the factory default settings.

●When the PS-9000 is turned on again after being initialized to the factory default settings, do not press the push button.

●The PS-9000 can be initialized to its factory default settings from the Brother PS-9000 Utility.

8

Image 9

Contents PS-9000 User’s Manual UK English PS-9000 IntroductionAbout this Manual ConventionsTable of Contents Appendix Safety Instructions About PS-9000 Compatible models About PS-9000QL-500 QL-550 QL-650TD QL-1050 QL-1050N PT-9500PC PT-9200DX Declaration of ConformityParts and Functions TopBottom Back Power ConnectorRight side Network Port 10BASE-T/100BASE-TX Push ButtonPrepare the following items Connection to the NetworkTurn on the P-touch USB Cable ConnectorsHardware specifications SpecificationsSoftware specifications Operation requirementsUsing the PS-9000 in a Windows Environment Starting the Brother PS-9000 Utility SetupReadme User’s GuideHow to Set Up the PS-9000 Installs this unit and the utilityInstalls the utility PS-9000 Setup Method Specify the IP address Select the PS-9000 to be set up, and then click Next8Specify the group name that will appear in the Start menu Selectport. if you want to set up the printerSelect the P-touch to be set up, and then click Next Setup configuration is displayed. Click FinishType in the printer port name, and then click Next Install the utility Install the printing client software Specify the group name that will appear in the Start menu After the setup preparations are finished, click NextIf the product is not displayed in the list, click Search Automatic IP address configuration with Dhcp Automatic IP address configuration with RarpOther Functions Using the PS-9000 With a Different P-touch Uninstalling the SoftwareClickThe softwareYes. is uninstalled Using the PS-9000 in a Windows EnvironmentUsing the Web Browser Using the Web Browser Display the PS-9000 WebType the IP address of the PS-9000 in the Web browser Configuration Manage PS-9000 Via the WebDisplay Status Questions & Answers Searching Questions & AnswersServer. In this case, the IP Or Quick EditorYes TroubleshootingStatus LED orange Appendix Page Print Test Page dialog box, select No, and then click Finish Click Next Print using an LPR port in Microsoft Windows 2000 ProPage Page Print using an LPR port in Microsoft Windows XP Page Page Below are the settings for PS-9000 PS-9000 SettingsWeb Default