Brother PS-9000 user manual Parts and Functions, Top, Bottom

Page 8

Parts and Functions

Top

10BASE LINK		STATUS LED
LED (Green)
100BASE LINK		(Orange)
LED (Green)

You can check the LED on the board.

■10BASE LINK LED (Green)

Lights when a 10BASE-T network connection is established.

■100BASE LINK LED (Green)

Lights when a 100BASE-TX network connection is established.

■STATUS LED (Orange) Flashes during data transfer.

Bottom

Ethernet Address

(The last 6 digits are the product’s serial number.)

■Ethernet Address

The Ethernet Address of the device. The last 6 digits are the product’s serial number.

Note

●Ethernet address 00:80:77:50:00: 01 is noted as 008077500001. The product’s number (serial number) is 500001.

7

Image 8

Contents PS-9000 User’s Manual UK English Introduction PS-9000About this Manual ConventionsTable of Contents Appendix Safety Instructions About PS-9000 About PS-9000 Compatible modelsQL-500 QL-550 QL-650TD QL-1050 QL-1050N PT-9500PC PT-9200DX Declaration of ConformityBottom Parts and FunctionsTop Power Connector BackRight side Network Port 10BASE-T/100BASE-TX Push ButtonConnection to the Network Prepare the following itemsUSB Cable Connectors Turn on the P-touchSpecifications Hardware specificationsSoftware specifications Operation requirementsUsing the PS-9000 in a Windows Environment Setup Starting the Brother PS-9000 UtilityReadme User’s GuideInstalls the utility How to Set Up the PS-9000Installs this unit and the utility PS-9000 Setup Method Select the PS-9000 to be set up, and then click Next Specify the IP addressSelectport. if you want to set up the printer 8Specify the group name that will appear in the Start menuType in the printer port name, and then click Next Select the P-touch to be set up, and then click NextSetup configuration is displayed. Click Finish Install the utility Install the printing client software After the setup preparations are finished, click Next Specify the group name that will appear in the Start menuIf the product is not displayed in the list, click Search Other Functions Automatic IP address configuration with DhcpAutomatic IP address configuration with Rarp Uninstalling the Software Using the PS-9000 With a Different P-touchClickThe softwareYes. is uninstalled Using the PS-9000 in a Windows EnvironmentUsing the Web Browser Type the IP address of the PS-9000 in the Web browser Using the Web BrowserDisplay the PS-9000 Web Display Status ConfigurationManage PS-9000 Via the Web Questions & Answers Questions & Answers SearchingOr Quick Editor Server. In this case, the IPTroubleshooting YesStatus LED orange Appendix Page Print Test Page dialog box, select No, and then click Finish Print using an LPR port in Microsoft Windows 2000 Pro Click NextPage Page Print using an LPR port in Microsoft Windows XP Page Page PS-9000 Settings Below are the settings for PS-9000Web Default