Brother HL-1060 Series manual Loading Paper into the Feeder

USER’S GUIDE

Loading Paper into the Feeder

To load paper into the feeder, follow these steps.

✒Note

This section describes loading paper into the front multi-purpose sheet feeder 1. Load paper into the rear sheet feeder 2 in the same way as described here. Remember, however, that paper sizes vary for Feeder 1 and Feeder 2. For paper sizes, see “ PAPER SPECIFICATIONS” in Chapter 2.

1.Open the multi-purpose sheet feeder by gently pulling the tabs forward towards you. ( ➀ )

2.Move the paper guides horizontally to the widest position. ( ➁ )

PULL

HERE TO

INSERT PAPER

Fig.2-4 Opening the Feeder and Moving the Paper Guides

3.Load paper into the multi-purpose sheet feeder with the printing surface face down.

Fig. 2-5 Loading Paper or Envelopes in the Feeder

CHAPTER 2 –6