Brother SHB6102 manual Control panel setup, LAN menu, Setup TCP/IP, Boot Method

Page 17

3

Control panel setup

LAN menu

The control panel LAN menu section can be used to configure network settings.

Press Menu, 5 for LAN and then proceed to the menu selection you wish to configure.

3

 

Please note that the machine is supplied with the BRAdmin Professional Windows® software, BRAdmin Light

Macintosh® software and RemoteSetup which also can be used to configure network settings (See the Network User’s Guide located on the CD-ROM included with your machine).

Note

If you already installed your machine for a network connection following the steps in the Quick Setup Guide then the TCP/IP settings have already been configured. You should only need to configure the Internet Fax settings. Go to Setup Internet on page 19.

Setup TCP/IP

This menu has nine sections: Boot Method, IP Address, Subnet Mask, Gateway, Node Name, WINS Config, WINS Server, DNS Server and APIPA.

BOOT Method

This selection controls how the machine obtains the IP address for itself. The default setting is Auto.

a b c d

Press Menu, 5, 1, 1.

Press a or b to select Auto, Static, RARP, BOOTP or DHCP.

Press OK.

Press Stop/Exit.

Auto mode

In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address to the machine, then the IP address supplied by the DHCP server will be used. If no DHCP server is available, then the machine will scan for a BOOTP server. If a BOOTP server is available, and it is configured correctly, the machine will take its IP address from the BOOTP server. If a BOOTP server is not available, the machine will scan for a RARP server. If a RARP server also does not answer, the IP Address is scanned through the APIPA facility. After it is initially powered ON, it may take a few minutes for the machine to scan the network for a server.

13

Image 17
Contents Network USER’S Guide Compilation and publication notice Definitions of warnings, cautions, and notesTrademarks Important Note Table of Contents Getting Connected Internet FAXOverview Sending an Internet Fax Control Panel Key FunctionsReceiving an Internet Fax to a PC Receiving an E-mail or Internet FaxTX Verification Mail Setup Mail TXForwarding Received E-mail and Fax Messages Relay Broadcasting Setup Mail RXError mail Sending to multiple phone numbers Relay Broadcast from a machineOutlook 97/98/2000/2002/2003 Important information on Internet FaxRelay Broadcast from a PC Windows Internet printing Internet Printing InstallationOverview Brother Internet Print General InformationPrint Server Configuration Checklist Brother Internet Print Configuring the Brother Print ServerSetup from CD-ROM Windows Internet printing Adding a Second Brother Internet Port Other sources of informationSetup TCP/IP Control panel setupBoot Method LAN menuControl panel setup IP Address Node Name Subnet MaskGateway Wins Server Wins ConfigApipa DNS ServerSmtp server Setup InternetMail Address Mailbox Pwd POP3 serverMailbox Name Header Auto PollingPoll Frequency Sender Subject Del Error MailNotification Size Limit Rly Broadcast Setup RelayRelay Domain Relay ReportEthernet Setup MiscTime Zone Scan to E-mail E-mail server Printing the Network Configuration ListRestoring the network settings to factory default Entering text Appendix aText Index