SETTING UP THE FAX MACHINE
INSTALLING THE PAPER
Follow these steps to install the paper roll.
Note: Use only Radio Shack Cat. No.
1. Open the operation panel.
2.Press OPEN to open the paper cover.
4.Insert the paper end into the paper exit slot.
5.Pull out the end of the roll from the exit slot until it extends about 4 inches.
6.Close the cover by firmly pressing both left and right corners on the back of the cover. The
PAPER HANDLING
3.Remove any slack from the roll and place it in the paper holder in the direction shown, with both sides seated securely.
Thermal paper is
•Store unused thermal paper away from high temperatures (158°F or over) and high humidity. These can darken the paper.
•Store copies away from direct sunlight and at a temperature below 94°F. Direct sunlight and high heat can fade the image.
•Avoid storing thermal copies next to blueprint (diazo) copies and plastic film or binders. The chemi- cals in these materials could fade the image.
9