Philips HFC 325 user manual Fax Reception, Receiving faxes manually, Polling Faxes

Page 14

EN

7Press o. The device goes into standby mode and trans- mits the fax at the entered time. You can continue to make telephone calls and receive faxes

Notice

Cancel a Scheduled Fax Transmission

Press j to eject the document. This interrupts the standby mode.

Fax Reception

Received faxes are printed out immediately. If no paper is inserted, the device saves incoming fax messages. DOC IN MEMORY! appears on the display. Up to 30 incoming fax messages are saved. If you insert paper, the saved messages are printed.

If necessary: Press o to start the printing.

Receiving faxes manually

1Using º/», select the reception mode.

TEL MODE – Manual fax reception. You can start fax reception manually, by pressing o after lifting the handset. This setting is useful, when you want to receive faxes via a modem connected to a computer.

FAX MODE – After two rings the fax switch switches on. Faxes are received automatically. If it is a voice call, the device goes back to the starting mode.

AUTO MODE – After a set number of rings, the device checks the incoming call. If it is a voice call, the device continues to ring (also see Chapter Setting the fax switch Page 18).

Polling Faxes

With the fax polling function, you can retrieve faxes that lie ready in the dialled device. You can keep a document ready in your device, which can be polled by others.

Polling Faxes Directly

1Enter the desired number using the numeric keypad or select a saved entry.

2Hold o pressed (for at least two seconds).

Polling Secure Faxes

With this function, you can poll faxes that are protected with a code.

1Press OK, 31 and OK.

2Enter the code.

3Confirm with OK.

4Enter the desired number using the numeric keypad or select a saved entry.

5Press o.

Polling Send of Faxes

CAUTION!

Unauthorised Fax Polling!

Protect your document against unauthorised polling with a code.

A caller who knows the code can poll the fax from your device. You can continue to make telephone calls and receive faxes

1Insert the document.

2Press OK, 32 and OK.

3Enter a code (max. 20 characters).

4Confirm with OK.

Notice

Cancel a Scheduled Fax Transmission

Press j to eject the document. This interrupts the standby mode.

14

Philips · HFC 325

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HFC Introduction Symbols UsedTroubleshooting Dear CustomerTable of Contents Setting Up the Machine General Safety InformationPower Supply RepairsDevice Overview OverviewOverview of the Menu Functions Panel Calculator keysInitial Operation Packing ContentsConnecting the Handset Loading PaperInitial Installation Connecting the Telephone CableConnecting the Mains Cable Getting Outside Line Telephone functionsPlacing a Call on the Device Chain DiallingTelephone Book of the Device GroupsDeleting Individual or All Group Entries Short DialCalling Line Identification Clip Assigning or Editing Short Dial EntrySending fax Cancel TransmissionFax Unsuitable DocumentsEavesdropping while Connection is Established Sending Fax ManuallyDirect Inward Dialling or Selecting Sub-address Sending to Multiple Recipients = BroadcastingPolling Faxes Fax ReceptionReceiving faxes manually Inserting the document Cancel CopyingCopier Making a CopyFun and Games SudokuSettings Setting the Fax Switch Switching Page Adjustment On and OffSetting the Ring Tones Reducing Transmission SpeedIsdn Connection Configuring Telephone Lines and ServicesDSL Connection Service Problems with the Connection Power CyclingProblems when faxing or printing Technical Data GuaranteeOut of Guarantee Repairs Declaration of Conformity DoCMail support.service@sagemcom.com Sagemcom Documents SAS
Top Page Image Contents