Philips HFC 325 Connecting the Telephone Cable, Connecting the Mains Cable, Initial Installation

Page 8

EN

Connecting the Telephone Cable

Connect the telephone cable to the device by inserting it in the socket designated with LINE (RJ-11-Connector). Insert the telephone plug into your PTT line socket.

Connecting the Mains Cable

CAUTION!

Mains Voltage at the Site of Installation!

Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location.

Insert the mains cable into the connection located on the rear side of the device. Plug the power cable into the elec- trical outlet.

Initial Installation

Selecting the Language

1Use [ to select the desired display language.

2Confirm with OK.

Selecting the Country

CAUTION!

Setting the Country Correctly!

You must set the country in which you are oper- ating the device. Otherwise your device is not adapted to the telephone network. If your coun- try is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.

1Use [ to select the country in which you are operat- ing the device.

2Confirm with OK.

After this input, the device prints a help page and checks the telephone line.

Entering Number

Your name and number are added together with date, time and page number at the top edge of each fax transmission (= header).

1Enter your number. Using or – you can enter a plus sign.

2Confirm with OK.

Entering Name

1Enter your name. You can enter characters using the numeric keys (see key labels). Enter special characters using 0. Press the respective key several times until the desired character or special character appears on the display.

Notice

Navigating in the Editor

You can move the cursor using [. Use Cto delete individual characters.

2Confirm with OK.

After entering the device prints an overview of the func- tions.

8

Philips · HFC 325

Page 7 Page 9
Image 8
Page 7 Page 9
Contents HFC Symbols Used TroubleshootingIntroduction Dear CustomerTable of Contents General Safety Information Power SupplySetting Up the Machine RepairsDevice Overview OverviewOverview of the Menu Functions Panel Calculator keysPacking Contents Connecting the HandsetInitial Operation Loading PaperInitial Installation Connecting the Telephone CableConnecting the Mains Cable Telephone functions Placing a Call on the DeviceGetting Outside Line Chain DiallingTelephone Book of the Device GroupsShort Dial Calling Line Identification ClipDeleting Individual or All Group Entries Assigning or Editing Short Dial EntryCancel Transmission FaxSending fax Unsuitable DocumentsSending Fax Manually Direct Inward Dialling or Selecting Sub-addressEavesdropping while Connection is Established Sending to Multiple Recipients = BroadcastingPolling Faxes Fax ReceptionReceiving faxes manually Cancel Copying CopierInserting the document Making a CopyFun and Games SudokuSettings Switching Page Adjustment On and Off Setting the Ring TonesSetting the Fax Switch Reducing Transmission SpeedIsdn Connection Configuring Telephone Lines and ServicesDSL Connection Service Problems with the Connection Power CyclingProblems when faxing or printing Technical Data GuaranteeOut of Guarantee Repairs Declaration of Conformity DoCMail support.service@sagemcom.com Sagemcom Documents SAS
Top Page Image Contents