Philips HFC 325 user manual Technical Data, Guarantee

Page 22

EN

Technical Data

Dimensions (L¦×¦H¦×¦W)

...................355¦×¦102¦×¦244¦mm

Weight

2,5¦kg

Mains Connection

100¦–¦240¦V¦~ / 50¦–¦60¦Hz

Power Consumption

 

Stand-by Mode

<¦2¦W

Transmission

<¦27¦W

Recommended Ambient

....................................5¦–¦35¦ºC

Relative Humidity

15¦–¦85¦% (non-condensing)

Connection Type

PSTN · PABX

Dialling Mode Tone / pulse dialling (country dependent)

Standards

Safety

EN¦60950-1

Emissions

EN¦55022 Class B

Immunity

EN¦55024

Scanner

Type

Black-and-White · 16 grey tones

Scan Width

212¦mm

Horizontal Resolution

8 dots/mm

Vertical Resolution

Standard: 7,7 lines/mm

...................................................

Fine: 15,4 lines/mm

Printer

Type

Thermal printing · Type Black-and-White

Printing paper

.....................................Thermal paper roll

Memory

Telephone Book ..................................... up to 50 entries

Document Feed Slot

Capacity

10 sheets

Width

148¦–¦210¦mm

Length

100¦–¦600¦mm

Thickness

0,06¦–¦0,15¦mm

Weight

60-120¦g/m²

Fax

Type

Group 3

Compatibility

ITU-T¦T.30

Data Compression

MH · MR

Modulation

V.21 · V.27ter · V.29

Transfer Speed

9.600¦bps

Copier

Type ..............................Black-and-White · 16 grey tones

Technical specifications subject to change with- out notice.

Guarantee

(Terms and Conditions for United King- dom only)

In order to supply the guarantee, you should contact your dealer or Sagemcom Helpdesk. The proof of purchase will be required.

Please make usage of your equipment for the purpose for which it was designed and under normal usage conditions.

Sagemcom do not accept any liability for any usage made out of the frame of its original designed purpose and any conse- quence that may arise from this usage.

Should any malfunctioning arise, the dealer or Sagemcom Helpdesk will advise you what to do.

A) General Guarantee Conditions

Sagemcom undertakes to remedy by repair or exchange at its own convenience, free of charge for labour and replacement parts, any defects in the equipment during the guarantee period of 12—twelve—months (3—three—months for accessories), from the date of original invoice of the Equip- ment, where those defects are a result of faulty workmanship.

Unless the customer has concluded with Sagemcom a main- tenance contract in respect of the equipment which specifi- cally provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on the equipment at the customer premises. The customer must however return the defective equipment at his/her own expense, to the address given by the dealer or Sagemcom Helpdesk.

In case a product needs to be sent in for a repair, it always has to be accompanied by a proof of purchase (which is not altered, written on or in any way be made illegible) showing that the product is still under warrantee. In case no proof of purchase is enclosed, the Sagemcom repair center will use the production date as a reference of establishing the warrantee status of the product.

Apart from all legal obligatory rules, Sagemcom, do not give any Guarantee, either implicit or explicit which is not set force in the present section, and could not be hold responsi- ble for any direct or indirect, material or immaterial damage, in or out of the frame of the present guarantee.

If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule applica- ble to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this guarantee.

This guarantee does not affect the Customer statutory rights.

B) Exclusions From Guarantee

Sagemcom shall have no liability under the guarantee in respect of:

•) Damage, defects, breakdown or malfunction due to one or more of the following:

Failure to properly follow the installation process and instructions for use

An external cause to the equipment (including but not lim- ited to: lightening, fire, shock, vandalism, inappropriate con- ditions of electrical network or water damage of any nature)

Modifications made without the written approval of Sagemcom

Unsuitable operating conditions, particularly of tempera- ture and humidity

Repair or maintenance of the equipment by persons not authorized by Sagemcom

•) Wear and tear from normal daily use of the equipment and its accessories

•) Damage due to insufficient or bad packaging of equipment when returned to Sagemcom

•) Usage of new versions of software without previous approval of Sagemcom

•) Work on any equipment or software modified or added without the prior written consent of Sagemcom

•) Malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment.

22

Philips · HFC 325

Image 22
Contents HFC Introduction Symbols UsedTroubleshooting Dear CustomerTable of Contents Setting Up the Machine General Safety InformationPower Supply RepairsOverview of the Menu Functions OverviewDevice Overview Panel Calculator keysInitial Operation Packing ContentsConnecting the Handset Loading PaperConnecting the Mains Cable Connecting the Telephone CableInitial Installation Getting Outside Line Telephone functionsPlacing a Call on the Device Chain DiallingTelephone Book of the Device GroupsDeleting Individual or All Group Entries Short DialCalling Line Identification Clip Assigning or Editing Short Dial EntrySending fax Cancel TransmissionFax Unsuitable DocumentsEavesdropping while Connection is Established Sending Fax ManuallyDirect Inward Dialling or Selecting Sub-address Sending to Multiple Recipients = BroadcastingReceiving faxes manually Fax ReceptionPolling Faxes Inserting the document Cancel CopyingCopier Making a CopyFun and Games SudokuSettings Setting the Fax Switch Switching Page Adjustment On and OffSetting the Ring Tones Reducing Transmission SpeedDSL Connection Configuring Telephone Lines and ServicesIsdn Connection Service Problems when faxing or printing Power CyclingProblems with the Connection Technical Data GuaranteeOut of Guarantee Repairs Declaration of Conformity DoCMail support.service@sagemcom.com Sagemcom Documents SAS