INMOTION IMMINI
PORTABLE AUDIO SYSTEM
Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of desktop environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!
BOX CONTENTS
•inMotion iMmini portable audio system
•3.5 mm stereo cable (for secondary input)
•Universal power supply
•Protective cover
•User’s guide and quick connect instructions
PLACING THE INMOTION SYSTEM
Position the inMotion iMmini system on a level surface, preferably close
to you (within three feet). The inMotion iMmini system can be placed close to video displays such as TVs and computer monitors without distorting the image.
MAKING CONNECTIONS
Warning: Do not insert the speaker system’s universal power supply into a wall outlet until all connections are made. Also, turn off your iPod mini before docking on the inMotion iMmini system.
To ensure
The iPod mini can be connected to the inMotion iMmini system via the docking port, while other audio devices must be connected using the secondary input jack. These are the only signal input connections that need to be made. After either of these connections are made, insert the barrel connector from the universal power supply into the connector marked
on the rear of the inMotion iMmini system. After this connection is made, insert the universal power supply into a wall outlet. You can now use your speakers.
Please note, the inMotion iMmini system can also be powered with four
AAbatteries (not included). Make sure the batteries are installed as illustrated in the battery compartments found on the bottom of the inMotion iMmini system.
POWER
AC POWER
After your iPod mini is docked on the inMotion iMmini system, plug the universal power supply into a wall outlet. The speaker system is now ready to operate.
DC (BATTERY) POWER
Install four AA batteries (not included) into the battery compartments on the bottom of the inMotion iMmini system (two to each compartment). Make sure the batteries are installed as illustrated in the battery compartments. After your iPod mini is docked on the inMotion iMmini system, the speaker system is ready to operate.
START PLAYING
1.Turn on your iPod mini.
2.Turn on the Altec Lansing inMotion iMmini system by sliding the power
switch located on the top/right of the unit 
to the right. A green LED will light next to the button when the power is on. The LED will turn amber in color to indicate the batteries need to be replaced.
Note: To avoid hearing a popping sound when you turn on your inMotion iMmini system, always turn on your audio source first.
AUTO POWER ON/OFF
The Auto Power On/Off feature is enabled after the inMotion unit is initially turned on using the power switch. After this initial step, the inMotion system will shut down automatically within a minute of the audio signal being turned off (or faster if battery power is running low), and turn on automatically when it detects an audio signal.
VOLUME
The volume slider on the top/left of the inMotion iMmini system is the master volume control for the speaker system. Move the slider to the right to increase the volume or to the left to decrease the volume.
2