Fujitsu SRS-9924 manual Using the Terminal

Page 25

Placing

Handset Calls

If you are already talking on another call

Receiving Handset Calls

Placing Handsfree Calls

1.Pick up the handset. This should automatically give you a dial tone. If not, press the idle Call Appearance (CA) you wish to use.

2.Dial the desired number.

3.Converse with the called party, then hang up.

1.End the call by pressing the button in the handset cradle to get a dial tone. (You can also hang up the handset and pick it up again.) Or Retain the call by pressing an idle CA button to get a dial tone. (The call is automatically put on hold.)

2.Converse with the called party, then hang up. Or If you put your original call on hold, pick up the call by pressing its red-flashing CA button.

Notes:

•The displayed call duration vanishes after about three seconds after you hang up.

•Onhook dialing can be used to place calls. Dial the number first, then pick up the handset. The phone automatically dials the number. The number entered remains available for dialing for about three minutes.

1.Pick up the handset, and if necessary, press the green flashing CA. The LED changes to steady red.

2.Converse with the calling party.

3.When your conversation ends, hang up by replacing the handset in its cradle.

A handsfree call uses the integrated microphone and speaker of the handset.

1.Press the SPKR button. Its LED will light red (if not, press an idle CA) and you will hear a dial tone.

2.Dial the desired number.

3.Converse with the called party.

4.Hang up by pressing the SPKR key.

(See also “Handsfree, Handset, and Headset Modes”, in Chapter 3, “Local Features”.)

2

Using the Terminal

2-3

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Terminal Overview Using Terminal Set-Up SRS-9924-ABM Terminal Intro & Table of ContentsTerminal Installation Terminal Accessories Appendix Terminal TestingFujitsu NI / 5E Custom Terminal Intro & Table of Contents Fujitsu NI 5E Custom Terminal Intro Table of Contents Mfgrs Port Facilities Service Order Network Jack HOW to USE this Guide DMS-100 Conventions and LayoutEwsd DIR Isdn Concepts Spid Table of Contents Appendix C Appendix a Testing Appendix BAppendix D SRS-9924 National Isdn Front Panel NI / 5E Custom Terminal OverviewSRS-9924 5E Custom Front Panel 5E Custom Terminal OverviewSRS-9912-SP National Isdn Front View SRS-9912-SP 5E Custom National Isdn Front View OverviewRear stand Unique Components Switches Connectors LED Indicators MIC-OFF Button Function Keys Permanent Functions NI utilizes Feature Activators 19 orFunction Button Layout For Multifunction Keys Buttons MultifunctionExample Line Assignment SRS-9924 NI / 5E Custom Terminal5E Custom only NI onlySoftkeys and Menu UNA5E Custom only Using the TerminalLine Parameters Autohold Onetouch Using TerminalSRS-9924 and SRS-9912-SP are equipped with Using the Terminal Receiving Handsfree Calls Placing Headset Calls Only If you are using the handset and want to use handsfree mode5E Custom MethodFunction Isdn Redial Dropping Out Conference Call Transfer Transfer DMS-100, NI1 ONE-TOUCH Calling Using Terminal UNA UNA-LIST Personal Directory DIRSet-Up Using the NI / 5E Custom TerminalStandard Softkey Layout Selecting a Using 5E Custom Terminal Set -UpMenu Option Options at any time, as follows 5E Custom only NI onlyProgramming a One-Touch Button Using the NI / 5E Custom Terminal Set-UpNumbers you program can be any of the following Enter Directory Number Associated LED turns green, and the word Mode main menu, press asteriskCorrect number Multifunction button again. The Enter4 7 6 2 9 , 9 9 , , 2 5 0 Enter Directory Number Setting the Calendar /CLOCK Enter the present date 1 to 31 and then press Terminal Set -Up Enabling the UNA FeatureTo return to normal operation, press Options To leave it as is, press Options againTo support UNA on all CAs, follow these steps NI / 5E Custom Terminal Set-UpOptions 4 Enter If the following screen appears, the feature is enabledHeadset Mode Handset Mode Handsfree Supported This feature enables and disables the speakerphone functionPress ENTER, and this screen appears Using the Handset or a HeadsetSetting Ringer Tone Selecting Ringer Pattern Selecting Ringer Pattern ModeAssigning a Access CodeLeased Network DelimiterAs the delimiter key. Its indicator goes out Goes off and the indicator of the new buttonTurns green. The number of the new button Appears on the displayRinger Always On Call Announce Intercom on Selected Buttons Select from the following Specifying the Directory Number for IntercomEnter the following appears TWO WAY Turned on Example 919*926*3112 Screen should now appear as follows Example 919 926-3112 orPress Options to return to standard display Repeat steps 2 and 3 until this screen appears NI onlyPreference options determine which CA Press the desired preference number, then Selecting CA PreferenceMIC-OFF 5E Custom only Menu Editing PersonalPress Exit to return to the initial screen Press Enter to display this screenData Using NetworkDirectory Full will be displayed. DigitsChapter Using the NI / 5E Custom SRS-9924-ABMAssignments SRS 9924 ABM 5E Custom ABM ButtonSRS-9924-ABM Bottom View 5E Custom SRS-9924-ABM 5ESS Chapter InstallationInstalling the Isdn equipment may be installed in a number Terminal InstallationSETTING-UP Spids Auto-SPID When the is indicating the correct SpidManually cleared Auto-SPID displays the following screens This screen is displayedDial your voice Spid number and press Enter 5E Custom Terminal Installation Loading or Configuration Types Ekts CachModifying Network Data after entering the Spid Numbers with options 1 and 2 of KEY-ATTR Key Attribute Configuration DownloadPress 2 to display the options for manual download Manual ConfigurationSecondary or shared Telephone Number Selection Call Appearance Cach Call ButtonsAre always distinctive CA=XXXX Completed If you press an unlit button, the screen looks like thisSet’s indicators show button status as follows You now have two choices If you select an unlit button, the screen looks like thisFactory default CA=1 CA setting. Then you can enter DNsThis completes programming of FAs. If you ProviderDirectory Number Mode DN=XX Selection Intercom/Group Final screen looks like this This returns you to the menu mode main menuPress selected Conf button. This screen appears Selection ConferencePress ENTER. The selected button’s LED turns green Completed Select Assign KEY Invalid Selection Selection 7 Originating DNPress the selected Multi-assign key ORG = TRM =Orgip = OFF =Selection Designated Call Appearance SRS-9924 Distance between the NT1 and the terminal is up to 230 ft Two Unit Installations Single Unit InstallationsNI / 5E Custom Terminal Accessories AccessoriesHandset Features 5E Custom Terminal AccessoriesIllustration. Three screws hold Wall Kit Terminal is attached to the wall byTerminal mount, and two screws hold Optional ABM mountTerminal ROM CartridgeTo replace the cartridge Remove the screw holding the cartridgeNI / 5E Custom Appendix Terminal Testing Appendix a TestingEntering Test Mode When the LED test is complete, this screen appearsTests Performing2SOFT2 3SOFT3 4SOFT4Function KEY Hold Function KEYConf Function KEY Redial SpeakerTo be handled by your System Administrator Its place if different errors are discoveredExiting Test Mode Memory Tests Pressing 4 on the numeric keypad starts anError Messages NI / 5E Custom Appendix Error MessagesAppendix B No RouteNot Available DiscardedUnspecified Facility N/AReference Value Element ContentsNON-EXISTENT or not ImplementedProceeding Call is ProceedingThreshold Exceeded Announcement Service DeniedUndefined Code UnassignedTable B-4 Uniform Cause Values Cause # Message Displayed NI / 5E Custom Appendix Ordering National Isdn Lines Appendix C Ordering National Isdn LinesLines and features Using IOCsConfiguration listed below. Following Select that solution packageCFV CFD/CFBMSG CNIConference Button/FA = Drop Button/FA Transfer Button/FA = IsdnCall Forwarding Variable FA = Appendix 5E Custom Terminal ICI Displays Appendix 5E Custom Terminal ICI Displays NI only To Make a Call To Transfer a Call Custom Commands for NI System only

SRS-9924 specifications

The Fujitsu SRS-9924 is a cutting-edge solution designed for high-performance computing, data storage, and advanced networking applications. This advanced system is centered on versatility, robustness, and efficiency, catering to diverse industry needs including data centers, telecommunications, and enterprise environments.

One of the key features of the SRS-9924 is its scalable architecture. It supports a wide range of configurations, allowing organizations to tailor the system to their specific requirements. This scalability ensures that as data demands grow, the SRS-9924 can adapt seamlessly with additional resources, making it future-proof for growing enterprises.

The SRS-9924 incorporates state-of-the-art processing power, with multi-core processors that enhance computational capabilities while improving energy efficiency. This is complemented by high-speed memory options, which optimize performance for demanding applications. As a result, users experience significantly faster data processing times, which is critical for applications such as real-time analytics and high-frequency trading.

Another notable technology in the SRS-9924 is its advanced networking capabilities. Equipped with robust connectivity options, it supports multiple protocols and architectures, allowing seamless integration into existing IT infrastructures. The system features high-bandwidth options that ensure rapid data transfer and lower latency, which is crucial for applications that rely on speed and reliability.

The Fujitsu SRS-9924 also prioritizes data protection and security. With sophisticated redundancy features and error-checking technologies, the system minimizes data loss risks and enhances reliability. This is particularly important in industries such as finance and healthcare, where data integrity is paramount.

Power management is another area where the SRS-9924 excels. Fujitsu has implemented innovative energy-saving features that not only reduce operational costs but also align with global sustainability goals. This focus on efficiency helps organizations achieve their green IT objectives without compromising on performance.

In summary, the Fujitsu SRS-9924 stands out as a versatile and powerful solution for modern computing challenges. With its scalable architecture, advanced processing and networking capabilities, enhanced security measures, and energy-efficient design, it is well-suited for organizations looking to leverage technology for competitive advantage in today’s data-driven landscape.
Top Page Image Contents