Fujitsu SRS-9924 manual Transfer DMS-100, NI1

Page 32

2

Using the

Terminal

TRANSFER <DMS-100, NI1>

Transfers a call to another phone

TRANSFER <EWSD>

Transfers a call to another phone

To transfer a call, follow these steps:

1. While still on the call, press CONF.

The CONF button indicator lights up. The call is put on hold and its CA indicator flashes red.

2.An idle CA/DN is selected. Dial the number of the person you want to transfer the call to.

•If the person answers, you can talk privately before completing the transfer.

•If the line is busy or the person does not answer, press the button in the handset cradle (press SPKR if you are using handsfree mode). Then press the flashing CA button to return to the original call.

Note: To do a “blind” transfer, where you do not talk to the person you are transferring the call to, wait for the person’s phone to ring, press the TRAN button, and hang up.

3.After announcing the transfer, press TRAN and hang up.

4.Hang up the handset, or, in handsfree mode, press SPKR.

You are disconnected from the call, leaving the other two parties connected.

Note: The DMS-100 NI1, the transfer procedure is different. On NI1, press CONF as the first

step, then follow the preceding instructions.

Note: In Siemens installations, transferring calls is accomplished without a TRAN button.

To transfer a call, follow these steps:

1. While on an active call, press CONF.

The CONF button indicator lights up. The call is put on hold, and its CA indicator flashes red.

2.An idle CA is selected. Dial the number of the person you want to transfer the call to.

•If the person answers, you can talk privately before completing the transfer.

2-10

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Terminal Intro & Table of Contents Terminal Overview Using Terminal Set-Up SRS-9924-ABMTerminal Installation Terminal Accessories Appendix Terminal TestingFujitsu NI / 5E Custom Terminal Intro & Table of Contents Fujitsu NI 5E Custom Terminal Intro Table of Contents Mfgrs Port Facilities Service Order Network Jack HOW to USE this Guide Ewsd Conventions and LayoutDMS-100 DIR Isdn Concepts Spid Table of Contents Appendix D Appendix a Testing Appendix BAppendix C NI / 5E Custom Terminal Overview SRS-9924 National Isdn Front Panel5E Custom Terminal Overview SRS-9924 5E Custom Front PanelSRS-9912-SP National Isdn Front View Overview SRS-9912-SP 5E Custom National Isdn Front ViewRear stand Unique Components Switches Connectors LED Indicators Function Button Layout For Multifunction Keys NI utilizes Feature Activators 19 orMIC-OFF Button Function Keys Permanent Functions Multifunction ButtonsNI / 5E Custom Terminal Example Line Assignment SRS-9924NI only 5E Custom onlySoftkeys and Menu UNALine Parameters Using the Terminal5E Custom only SRS-9924 and SRS-9912-SP are equipped with Using TerminalAutohold Onetouch Using the Terminal Receiving Handsfree Calls Placing Headset Calls If you are using the handset and want to use handsfree mode Only5E Custom MethodFunction Isdn Redial Dropping Out Conference Call Transfer Transfer DMS-100, NI1 ONE-TOUCH Calling Using Terminal UNA DIR UNA-LIST Personal DirectoryStandard Softkey Layout Using the NI / 5E Custom TerminalSet-Up Using 5E Custom Terminal Set -Up Selecting aMenu Option Options at any time, as follows 5E Custom only NI onlyNumbers you program can be any of the following Using the NI / 5E Custom Terminal Set-UpProgramming a One-Touch Button Enter Directory Number Mode main menu, press asterisk Associated LED turns green, and the wordCorrect number Multifunction button again. The Enter4 7 6 2 9 , 9 9 , , 2 5 0 Enter Directory Number Setting the Calendar /CLOCK Enter the present date 1 to 31 and then press Enabling the UNA Feature Terminal Set -UpTo return to normal operation, press Options To leave it as is, press Options againNI / 5E Custom Terminal Set-Up To support UNA on all CAs, follow these stepsIf the following screen appears, the feature is enabled Options 4 EnterThis feature enables and disables the speakerphone function Headset Mode Handset Mode Handsfree SupportedUsing the Handset or a Headset Press ENTER, and this screen appearsSetting Ringer Tone Selecting Ringer Pattern Mode Selecting Ringer PatternAccess Code Assigning aLeased Network DelimiterGoes off and the indicator of the new button As the delimiter key. Its indicator goes outTurns green. The number of the new button Appears on the displayRinger Always On Call Announce Intercom on Selected Buttons Enter the following appears Specifying the Directory Number for IntercomSelect from the following TWO WAY Turned on Press Options to return to standard display Example 919 926-3112 orExample 919*926*3112 Screen should now appear as follows Preference options determine which CA NI onlyRepeat steps 2 and 3 until this screen appears Selecting CA Preference Press the desired preference number, thenMIC-OFF 5E Custom only Editing Personal MenuPress Enter to display this screen Press Exit to return to the initial screenUsing Network DataDirectory Full will be displayed. DigitsUsing the NI / 5E Custom SRS-9924-ABM ChapterSRS 9924 ABM 5E Custom ABM Button AssignmentsSRS-9924-ABM Bottom View 5E Custom SRS-9924-ABM Chapter Installation 5ESSTerminal Installation Installing the Isdn equipment may be installed in a numberSETTING-UP Spids When the is indicating the correct Spid Auto-SPIDManually cleared Auto-SPID displays the following screens This screen is displayedDial your voice Spid number and press Enter 5E Custom Terminal Installation Modifying Network Data after entering the Spid Configuration Types Ekts CachLoading or Key Attribute Configuration Download Numbers with options 1 and 2 of KEY-ATTRManual Configuration Press 2 to display the options for manual downloadAre always distinctive Selection Call Appearance Cach Call ButtonsSecondary or shared Telephone Number If you press an unlit button, the screen looks like this CA=XXXX CompletedSet’s indicators show button status as follows If you select an unlit button, the screen looks like this You now have two choicesCA setting. Then you can enter DNs Factory default CA=1This completes programming of FAs. If you ProviderDirectory Number Mode DN=XX This returns you to the menu mode main menu Selection Intercom/Group Final screen looks like thisPress ENTER. The selected button’s LED turns green Selection ConferencePress selected Conf button. This screen appears Selection 7 Originating DN Completed Select Assign KEY Invalid SelectionPress the selected Multi-assign key TRM = ORG =Orgip = OFF =Selection Designated Call Appearance SRS-9924 Distance between the NT1 and the terminal is up to 230 ft Single Unit Installations Two Unit InstallationsAccessories NI / 5E Custom Terminal Accessories5E Custom Terminal Accessories Handset FeaturesWall Kit Terminal is attached to the wall by Illustration. Three screws holdTerminal mount, and two screws hold Optional ABM mountROM Cartridge TerminalTo replace the cartridge Remove the screw holding the cartridgeAppendix a Testing NI / 5E Custom Appendix Terminal TestingEntering Test Mode When the LED test is complete, this screen appearsPerforming Tests2SOFT2 3SOFT3 4SOFT4Function KEY Function KEY HoldConf Function KEY Redial SpeakerIts place if different errors are discovered To be handled by your System AdministratorExiting Test Mode Memory Tests Pressing 4 on the numeric keypad starts anNI / 5E Custom Appendix Error Messages Error MessagesAppendix B No RouteDiscarded Not AvailableUnspecified Facility N/AElement Contents Reference ValueNON-EXISTENT or not ImplementedThreshold Exceeded Call is ProceedingProceeding Service Denied AnnouncementUndefined Code UnassignedTable B-4 Uniform Cause Values Cause # Message Displayed Appendix C Ordering National Isdn Lines NI / 5E Custom Appendix Ordering National Isdn LinesUsing IOCs Lines and featuresConfiguration listed below. Following Select that solution packageCFD/CFB CFVMSG CNICall Forwarding Variable FA = IsdnConference Button/FA = Drop Button/FA Transfer Button/FA = Appendix 5E Custom Terminal ICI Displays Appendix 5E Custom Terminal ICI Displays NI only To Make a Call Custom Commands for NI System only To Transfer a Call

SRS-9924 specifications

The Fujitsu SRS-9924 is a cutting-edge solution designed for high-performance computing, data storage, and advanced networking applications. This advanced system is centered on versatility, robustness, and efficiency, catering to diverse industry needs including data centers, telecommunications, and enterprise environments.

One of the key features of the SRS-9924 is its scalable architecture. It supports a wide range of configurations, allowing organizations to tailor the system to their specific requirements. This scalability ensures that as data demands grow, the SRS-9924 can adapt seamlessly with additional resources, making it future-proof for growing enterprises.

The SRS-9924 incorporates state-of-the-art processing power, with multi-core processors that enhance computational capabilities while improving energy efficiency. This is complemented by high-speed memory options, which optimize performance for demanding applications. As a result, users experience significantly faster data processing times, which is critical for applications such as real-time analytics and high-frequency trading.

Another notable technology in the SRS-9924 is its advanced networking capabilities. Equipped with robust connectivity options, it supports multiple protocols and architectures, allowing seamless integration into existing IT infrastructures. The system features high-bandwidth options that ensure rapid data transfer and lower latency, which is crucial for applications that rely on speed and reliability.

The Fujitsu SRS-9924 also prioritizes data protection and security. With sophisticated redundancy features and error-checking technologies, the system minimizes data loss risks and enhances reliability. This is particularly important in industries such as finance and healthcare, where data integrity is paramount.

Power management is another area where the SRS-9924 excels. Fujitsu has implemented innovative energy-saving features that not only reduce operational costs but also align with global sustainability goals. This focus on efficiency helps organizations achieve their green IT objectives without compromising on performance.

In summary, the Fujitsu SRS-9924 stands out as a versatile and powerful solution for modern computing challenges. With its scalable architecture, advanced processing and networking capabilities, enhanced security measures, and energy-efficient design, it is well-suited for organizations looking to leverage technology for competitive advantage in today’s data-driven landscape.
Top Page Image Contents