Fujitsu SRS-9924 manual Terminal Set -Up, To return to normal operation, press Options

3

Using the

NI /

5E Custom

UNANSWERED CALL LOGGING (UNA)

If enabled, this feature records information about incoming calls that were not answered at this phone.

1. OPTIONS 3 ENTER

PRIVATE DATA CLEAR

(1:YES 2:NO)->

2.Press 1, then ENTER to clear all data, Or

Press 2, then ENTER to retain all data.

If you choose 1, this screen appears:

PRIVATE DATA CLEAR

COMPLETED

To return to normal operation, press OPTIONS.

For each unanswered call (up to eight), the set records the date and time of the call plus the telephone number of the calling party. The ninth and later unanswered calls replace the first, second, and so forth, in order, so your UNA list always has the most recent eight. (If the caller gets a busy signal, the call is not considered “unanswered”.)

If the set receives a call from a number already on the UNA list, the latest call is recorded and the earlier call is dropped from the list. The set can be configured to record unanswered calls for all lines, designated lines, or no lines (Not Activated).

Terminal Set -Up

Enabling the UNA Feature

To enable unanswered call logging and select the type of UNA to be used, follow these steps:

1. OPTIONS 4 ENTER

If the following screen appears, the UNA feature is disabled:

UNA SERVICE MODE

NON SUPPORTED

To leave it as is, press OPTIONS again.

3-10