Fujitsu SRS-9924 manual Directory Number Mode DN=XX

NI ONLY

The set’s indicators show button status as follows:

•Green indicates a button already assigned to a Directory Number.

•Red indicates a button already assigned to a network feature or to a local feature such as one-touch.

•Unlit indicates an unassigned button.

4.Press the button to which you want to assign the Directory Number.

You can press any unlit or green multifunction button. If you press a red button, the display shows the message INVALID SELECTION and the set waits for you to press a valid button.

•If you press a green button, the display shows the current Directory Number assigned to that multifunction button. You can either enter a new Directory Number to replace the current number or cancel the current number.

•If you press an unlit button, the screen looks like this:

DIRECTORY NUMBER MODE

DN=(XX)

XXis the number of the multifunction button you pressed. If you pressed a green-lit button, the current Directory Number appears after DN=. The new number you enter replaces this number.

5. You now have two choices:

•To add or change the DN assignment, enter the Directory Number and then press ENTER.

•To cancel a DN assignment, press CLEAR (softkey 3) and then press ENTER.

5

NI / 5E Custom Terminal Installation

5-15