Happy Voyager
Using the Trace Function | 15 |
Description of function
The trace function is used to verify that the pattern selected embroiders within the boundaries of the attached hoop.
It is Very important to perform a TRACE before sewing out a pattern !!!
Perform a trace by pressing the TRACE button.
The frame (Hoop) begins tracing the pattern (Design) within the hoop.
Visually observe the hoop and the front/back of presser foot and check to make sure the presser foot is within the perimeter of the attached hoop.
1024
Once the trace is done, the stitches count of 1024 stitches is displayed.
To perform a 2nd trace, select FUNCTION, Top and select TRACE.