Happy Voyager
Installing the Cap Device/Machine Set Up | 22 |
With the cap frame driver mounted, the embroidery design is automatically turned upside down and a cap icon is displayed in the upper right hand corner of the screen.
Note: If the cap icon is not displayed check the actu- ating lever mentioned in the previous page.
Note: When using the cap frame a selection of the cap frame type must be selected. (Normal or Wide frame)
Select OPTION , press SET.
After selecting OPTION , two Icons appear, the one on the right is for machine options and the one on the left is for pattern options. Select the Machine Icon and press, “Set”.
Use the down arrow key to move to 17 Cap Frame Type. Press SET to activated, use the up/down keys to change, press SET to accept change. Select ESC to exit the frame menu and ESC again to return to the drive menu.
In the drive mode next to the cap Icon a W is dis- played.
Note:
The Normal cap represents a 67mm x 180mm em- broidery field
The Wide cap represents a 67mm x 290mm em- broidery field