Bernina Happy Voyager manual Explanation of Issue

Happy Voyager

Removing Unwanted Jump Stitches 20

Explanation of Issue:

If cut at jump data is set to “0” , no stitches will be cut . (The thread cuts between the different color changes is not effected.)

Note: While jumping between to————-be the needle bar is disengage and causes a loud clank- ing noise!

Explanation of Issue:

If cut at jump data is set to “3” , which is the de- fault setting. All stitches with more then 3 jumps will be cut, those with less then 3 will not be cut.

Jump stitch