Bernina manual Happy Voyager Installing the Hoop Tech Device/Machine Set Up, SET executions

Happy Voyager

Installing the Hoop Tech Device/Machine Set Up 23

Description of function

Interchangeable Tubular Clamping System (ITCS) The clamping capability of the ITCS allows embroi- dering with many, otherwise "un-hoop-able or difficult to hoop" items, such as suit cases, leather etc. The ITCS are available in a large (ITCS2) or small (ITCS1) chassis size, each with an assortment of window sizes that are quickly and easily exchange- able without the use of tools.

Warning: Extra precaution must me taken when us- ing this device:

• Never turn on the machine with the Interchange- able Tubular Clamping System installed.

•Only install the ITCS after the machine has cali- brated its X & Y position.

•Do not performing power fail recovery with ITCS installed.

•Only move the X & Y position or TRACE with the Clamping System closed

•Just in case, be prepared to hit the red panic button during the TRACE and any X & Y OFF-

SET executions.

The ITCS is a effective device to efficiently embroi- der - bags - CD cases - jackets - leather - canvas - quilted goods - computer bags - back of caps, etc.

Basic clamping system requires 3 items:

1.Interchangeable Tubular Clamping System (Either ITCS 1 small or ITCS 2 Larger )

2.Set of Tubular arms (Brackets)

Arm ITCS 2 , model 1201

3.Window insert to fit the clamping system and most appropriate for the embroidery task.

Note: Additional window insert for each

Tubular Clamping System are available.